SpectraLink Corporation | Polycom SX-200 ICP, 72-1084-02 manual

SpectraLink Corporation	Configuration and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

as long as the SVP Server and APs are on the same subnet. However, in such networks, it is possible for the QoS features of the NetLink SVP Server to be compromised, and voice quality may suffer. Any network that consists of more than a single Ethernet switch should be thoroughly tested to ensure any quality issues are detected.

Note that the NetLink e340/h340/i640 Wireless Telephones cannot actively roam from one subnet to another. If routers and multiple subnets are in use, the NetLink Wireless Telephones must only use APs attached to a single subnet, or be powered off and back on to switch to a different subnet.

Mitel Networks IP Phone The wired LAN desksets provided by Mitel Networks for use with the supported Mitel Networks IP telephony system.

TFTP server Required in the system to distribute software to the handsets. May be on a different subnet than the supported Mitel Networks IP telephony device(s) and APs.

PN: 72-1084-02-G.doc

Page 10

Image 10

Polycom SX-200 ICP, 72-1084-02, Mitel Networks 3300 manual SpectraLink Corporation

Contents

Configuration and Administration NetLink e340/h340/i640 Wireless TelephoneMitel Networks 3300 and SX-200 ICP Copyright Notice Trademark InformationPatent Information Contact Information Table of Contents Referenced Documents About This DocumentCustomer Support Hotline Icons and Conventions Gateway NetLink e340/h340/i640 Wireless Telephone Overview QoS and Security Quick Start Guide System Diagram Mitel Networks IP telephony server architecture example System Components SpectraLink Corporation WPA2-PSK NetLink Wireless TelephoneSpecifications DHCP, Tftp Display Audio features Ringing and tones Icon Icons shown in bold turns off when Startup SequenceEXT Predial Handset ModesStandby on-hook Active off-hook Line display NetLink Wireless Telephone DisplaysStatus display area Menu display Admin Menu NetLink Wireless Telephone ConfigurationOpening the Admin Menu Alphanumeric string entry Entering and editing Admin menu optionsTo Enter Press ESS ID Admin menuAdmin Menu Items 2nd Level 3rd Level 4th Level 5th Level WEP Admin Menu Items 2nd Level 3rd Level Push-to-talk Essid Select either WEP Off or WEP On North America Europe except Spain and France Japan channels Standby menu item Nd Level Rd Level Th Level User-defined PreferencesStandby menu PBX 4th Level Standby menu item 2nd Level 3rd Level Telephone Ring Auxiliary Ring Continuous Short Pulse Long Pulse Phone Options Channel Enable/Disable Audio Volume Tone V olume License Management Configuration ProcessRequirements SpectraLink Corporation CODECs Voice messaging accessMitel Networks VoIP Integration Factors Option Meaning SpectraLink Corporation Feature Programming 5220 key Feature Handset Shortcut Key Sequence Feature AssignmentFCN + Feature list Feature AccessLine appearances Hot desking SuperkeyResiliency Paging Testing a Handset Diagnostic Tools Run Site Survey 7 b c Solving coverage issues Diagnostics ModeScreen M m m Screen Syslog Mode Message type Errors Events Full MAC AP MAC Certifying the NetLink Wireless Telephones Conducting a Site Survey Normal download messages Software MaintenanceUpgrading NetLink Wireless Telephones Message Description Download failure or recovery messages Access Point Problems Troubleshooting NetLink Wireless Telephone ProblemsConfiguration Problems NetLink Wireless Telephone Status Messages Message Description Action Message Description Action Do not Power OFF PBX Configuration Note Dhcp LAN Message Description Action Maintenance Index