Polycom 72-1084-02, SX-200 ICP manual Channel Enable/Disable Audio Volume Tone V olume

SpectraLink Corporation	Configuration and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

Push-to-talk The NetLink i640 Wireless Telephone incorporates PTT functionality. PTT may be allowed or disallowed in the Admin menu. If allowed, the user may enable or disable locally, and may set the channel, tone volume and audio volume. The menu for push-to-talk does not appear if PTT is disallowed on the Admin menu or if no channel is enabled on the Admin menu.

Channel

Enable/Disable

Audio Volume

Tone V olume

OK Up

Channel The user may enable any PTT channel that has been allowed in the Admin menu by entering the corresponding number from the keypad. If PTT has been enabled in this handset, the default channel is the lowest allowed channel as set in the Admin menu.

Current Channel X 1 2 3 4 5 6 7 8 New Channel = ?

Up

Enable/Disable The user may enable or disable PTT on this handset. PTT is disabled by default.

PTT Enabled

PTT Disabled

OK Up

Audio Volume, Tone Volume The user may select volume levels by pressing the Up and Down side buttons and then pressing the OK softkey. The graduated volume bar indicates the levels. The Audio Volume setting may be overridden by adjusting volume while the handset is in a push-to-talk call.

If PTT is allowed in the Admin menu and enabled by the user, Battery Pack life when the handset is in standby mode is decreased to about 30 hours.

(Additional options may be present. Contact your system administrator for information.)

PN: 72-1084-02-G.doc Page 30