Polycom Mitel Networks 3300, 72-1084-02, SX-200 ICP manual SpectraLink Corporation

SpectraLink Corporation	Configuration and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

each time it powers on. See NetLink Wireless Telephone Configuration section for detailed configuration instructions.

6.Power cycle the handset.

7.The MiNET code will now download to the handset. The status bar will increment fully across the display for each function that is being performed in the download process. Upon completion of the update process, the handset will re-boot with the new firmware.

8.If the handset is statically configured, you may now enter the SVP IP address and RTC address as detailed in the NetLink Wireless Telephone Configuration section above.

9.Register the handset with the supported Mitel Networks VoIP solution as if it were a SpectraLink NetLink phone and properly label the handset with the appropriate extension.

For future software upgrades, simply update the files that are stored on the TFTP server. Each time the handset is powered up, it will check with the TFTP server to ensure it has the proper software version.

PN: 72-1084-02-G.doc Page 32