Polycom SIP 2.2.0 manual This configuration attribute is defined as follows

Configuration Files

Network Monitoring <netMon/>

Polycom recommends that you do not change these values.

This configuration attribute is defined as follows:

Attribute	Permitted	Default
	Values
tcpIpApp.netMon.enabled	0, 1	1
tcpIpApp.netMon.period	1 to 86400	30

Time Synchronization <sntp/>

The following table describes the parameters used to set up time synchronization and daylight savings time. The defaults shown will enable daylight savings time (DST) for North America.

Daylight savings defaults:

• Do not use fixed day, use first or last day of week in the month.

• Start DST on the second Sunday in March at 2 am.

• Stop DST on the first Sunday in November at 2 am.

	Permitted
Attribute	Values	Default	Interpretation
tcpIpApp.sntp.resyncPeriod	positive	86400 (24	Time in seconds between
	integer	hours)	Simple Network Time
			Protocol (SNTP) re-syncs.
tcpIpApp.sntp.address	valid host	clock	Address of the SNTP
	name or IP		server.
	address

A - 51