Polycom SIP 2.2.0 manual Presence pres, Fonts font

Administrator’s Guide SoundPoint IP / SoundStation IP

	Permitted
Attribute	Values	Default	Interpretation
dir.local.nonVolatile.maxSize.8meg	1 to 100	100	Attribute applies only to platforms
			with 8 Mbytes of flash memory.
			This is the maximum size of
			non-volatile storage that the
			directory will be permitted to
			consume.
dir.search.field	0, 1	Null	Specifies how to search the contact
			directory. If set to 1, search by
			contact’s first name. If set to 0,
			search by contact’s last name.

Presence <pres/>

The parameter pres.reg is the line number used to send SUBSCRIBE. If this parameter is missing, the phone will use the primary line to send SUBSCRIBE.

Attribute	Permitted	Default	Interpretation
	Values
pres.reg	positive	1	Specifies the line/registration
	integer		number used to send SUBSCRIBE
			for presence. Must be a valid
			line/registration number. If the
			number is not a valid
			line/registration number, it is
			ignored.

Fonts <font/>

Note This section does not apply to the SoundPoint IP 301 phones.

These settings control the phone’s ability to dynamically load an external font file during boot up. Loaded fonts can either overwrite pre-existing fonts embedded within the software (not recommended) or can extend the phone’s font support for Unicode ranges not already embedded. The font file must be a Microsoft .fnt or .fon file format. (.fon file format is a collection of .fnt fonts grouped together within a single file.) The font file name must follow a specific pattern as described:

•Font filename:

<fontName>_<fontHeightInPixels>_<fontRange>.<fontExtension>

A - 60