Polycom SIP 2.2.0 manual Information, contact your Certified Polycom Reseller, Read-only

Setting up Your System

	All of the boot servers must be reachable by the same protocol and the content
	available on them must be identical. The parameters described in section
	Server Menu on page 3-9can be used to configure the number of times each
	server will be tried for a file transfer and also how long to wait between each
	attempt. The maximum number of servers to be tried is configurable. For more
	information, contact your Certified Polycom Reseller.
Note
	Be aware of how logs, overrides and directories are uploaded to servers that maps
	to multiple IP addresses. The server that these files are uploaded to may change
	over time.
	If you want to use redundancy for uploads, synchronize the files between servers in
	the background.
	However, you may want to disable the redundancy for uploads by specifying
	specific IP addresses instead of URLs for logs, overrides, and directory in the
	MACaddress.cfg .

To set up the boot server:

Note Use this procedure as a recommendation if this is your first boot server setup.

1.Install boot server application or locate suitable existing server(s).

Polycom recommends that you use RFC-compliant servers.

	2. Create account and home directory.
Note
	If the provisioning protocol requires an account name and password, the server
	account name and password must match those configured in the phones. Defaults
	are: provisioning protocol: FTP, name: PlcmSpIp, password: PlcmSpIp.
	Each phone may open multiple connections to the server.
	The phone will attempt to upload log files, a configuration override file,
	and a directory file to the server. This requires that the phone’s account has
	delete, write, and read permissions. The phone will still function without
	these permissions, but will not be able to upload files.
	The files downloaded from the server by the phone should be made
	read-only.
Note
	Typically all phones are configured with the same server account, but the server
	account provides a means of conveniently partitioning the configuration. Give each
	account an unique home directory on the server and change the configuration on
	an account-by-account basis.

3 - 13