Polycom SIP 2.2.0 manual Log.render.level maps to, You do not change this value

Configuration Files

Basic Logging <level/><change/> and <render/>

This configuration attribute is defined as follows:

	Permitted
Attribute	Values	Default	Interpretation
log.level.change.xxx	0-5	4	Control the logging detail level for
			individual components. These are
			the input filters into the internal
			memory-based log system.
			Possible values for xxx are so,
			app1, sip, sspsc, ssps, pps, net,
			cfg, cdp, pmt, ftp, ares, dns, cxss,
			httpd, rdisk, copy, slog, res, key,
			log, curl, rtos, mb, ib, sotet, ttrs,
			srtp, usb, .
log.render.level	0-6	1	Specifies the lowest class of event
			that will be rendered to the log files.
			This is the output filter from the
			internal memory-based log system.
			The log.render.level maps to
			syslog severity as follows:
			0	-> SeverityDebug (7)
			1	-> SeverityDebug (7)
			2	-> SeverityInformational (6)
			3	-> SeverityInformational (6)
			4	-> SeverityError (3)
			5	-> SeverityCritical (2)
			6	-> SeverityEmergency (0)
			7	-> SeverityNotice (5)
			For more information, refer to
			Syslog Menu on page 3-11.
log.render.type	0-2	2	Refer to above table for timestamp
			type.
log.render.realtime	0, 1	1	Set to 1.
			Note: Polycom recommends that
			you do not change this value.
log.render.stdout	0, 1	1	Set to 1.
			Note: Polycom recommends that
			you do not change this value.
log.render.file	0, 1	1	Set to 1.
			Note: Polycom recommends that
			you do not change this value.

A - 71