Configuration Files

 

 

 

 

 

 

 

 

 

 

Date and Time <datetime/>

 

 

 

 

This configuration attribute is defined as follows:

 

 

 

 

 

 

 

 

 

 

 

 

Permitted

 

 

 

 

 

Attribute

 

 

Values

 

 

Interpretation

lcl.datetime.time.24HourClock

 

 

0,1

 

 

If 1, display time in 24-hour clock mode rather than

 

 

 

 

 

 

a.m./p.m.

 

 

 

 

 

 

 

 

lcl.datetime.date.format

 

 

string which

 

 

Controls format of date string.

 

 

 

includes ‘D’, ‘d’

 

D = day of week

 

 

 

and ‘M’ and two

 

d = day

 

 

 

 

optional commas

 

M = month

 

 

 

 

 

 

Up to two commas may be included.

 

 

 

 

 

 

For example: D,dM = Thursday, 3 July or Md,D = July

 

 

 

 

 

 

3, Thursday

 

 

 

 

 

 

The field may contain 0, 1 or 2 commas which can

 

 

 

 

 

 

occur only between characters and only one at a time.

 

 

 

 

 

 

For example: “D,,dM” is illegal.

 

 

 

 

 

 

 

 

lcl.datetime.date.longFormat

 

 

0,1

 

 

If 1, display the day and month in long format

 

 

 

 

 

 

(Friday/November), otherwise, use abbreviations

 

 

 

 

 

 

(Fri/Nov).

 

 

 

 

 

 

 

 

lcl.datetime.date.dateTop

 

 

0, 1

 

 

If 1, display date above time else display time above

 

 

 

 

 

 

date.

 

 

 

 

 

 

 

 

 

User Preferences <up/>

 

 

 

 

 

 

This configuration attribute is defined as follows:

 

 

 

 

 

 

 

 

Attribute

 

Permitted

Default

 

Interpretation

 

Values

 

up.headsetMode

 

0,1

0

 

 

 

If set to 1, the headset will be selected as the

 

 

 

 

 

 

 

 

preferred transducer after its first use until the

 

 

 

 

 

 

 

 

headset key is pressed again; otherwise,

 

 

 

 

 

 

 

 

hands-free will be selected preferentially over

 

 

 

 

 

 

 

 

the headset.

 

 

 

 

 

 

 

 

up.useDirectoryNames

 

0,1

0

 

 

 

If set to 1, the name fields of directory entries

 

 

 

 

 

 

 

 

which match incoming calls will be used for

 

 

 

 

 

 

 

 

caller identification display and in the call lists

 

 

 

 

 

 

 

 

instead of the name provided through network

 

 

 

 

 

 

 

 

signaling.

 

 

 

 

 

 

 

 

up.oneTouchVoiceMail

 

0, 1

0

 

 

 

If set to 1, the voice mail summary display is

 

 

 

 

 

 

 

 

bypassed and voice mail is dialed directly (if

 

 

 

 

 

 

 

 

configured).

 

 

 

 

 

 

 

 

up.welcomeSoundEnabled

 

0, 1

1

 

 

 

If set to 1, play welcome sound effect after a

 

 

 

 

 

 

 

 

reboot.

 

 

 

 

 

 

 

 

 

A - 23

Page 135
Image 135
Polycom SIP 2.2.0 manual User Preferences up, Permitted Attribute Values Interpretation