Polycom SIP 2.2.0 manual To upgrade your SIP application

Setting up Your System

The following procedure must be used for upgrading to SIP 2.2.0 or later for installations that have SoundPoint IP 300 and 500 phones deployed. It is also recommended that this same approach be followed even if SoundPoint IP 300 and 500 phones are not part of the deployment as it will simplify management of phone systems with future software releases.

To upgrade your SIP application:

1.Do one of the following steps:

a Place the bootrom.ld file corresponding to BootROM revision 4.0.0 (or later) onto the boot server.

b Ensure that all phones are running BootROM 4.0.0 or later code.

2.Copy sip.ld, sip.cfg and phone1.cfg from the SIP2.2.0 or later release distribution onto the boot server.

These are the relevant files for all phones except the SoundPoint IP 300 and 500 phones.

3.Copy sip_212.ld, sip_212.cfg, and phone1_212.cfg files from the SIP 2.2.0 or later release onto the boot server.

These are the relevant files for supporting the SoundPoint IP 300 and 500 phones.

4.Modify the 000000000000.cfg file, if required, to match your configuration file structure.

For example:

<APPLICATION

APP_FILE_PATH="sip.ld"

APP_FILE_PATH_SPIP500="sip_212.ld"

APP_FILE_PATH_SPIP300="sip_212.ld"

CONFIG_FILES="[PHONE_MAC_ADDRESS]-user.cfg, phone1.cfg, sip.cfg" CONFIG_FILES_SPIP500="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg" CONFIG_FILES_SPIP300="[PHONE_MAC_ADDRESS]-user.cfg,

phone1_212.cfg, sip_212.cfg" MISC_FILES="" LOG_FILE_DIRECTORY=""

OVERRIDES_DIRECTORY=""

CONTACTS_DIRECTORY="" />

5.Remove any <Ethernet address>.cfg files that may have been used with earlier releases from the boot server.

3 - 19