Polycom SIP 2.2.0 Multilingual User Interface, SoundStation IP 4000’s higher resolution display

Configuring Your System

message or by initiating a new dialog. The destination for new dialog messages can be entered manually or selected from the contact directory, the preferred method.

There are no related configuration changes.

Multilingual User Interface

	Note		This feature is not available on SoundPoint IP 301 phones.
			The system administrator or the user can select the language. Support for
			major western European languages is included and additional languages can
			be easily added. Support for Asian languages (Chinese, Japanese, and Korean)
			is also included, but will display only on the SoundPoint IP 600, 601, and 650
			and SoundStation IP 4000’s higher resolution display.
			For basic character support and extended character support (available on
			SoundPoint IP 600, 601, and 650 and SoundStation IP platform), refer to
			Multilingual <ml/> on page A-20. (Note that within a Unicode range, some
			characters may not be supported due to their infrequent usage.)
	Note
			The multilingual feature relies on dictionary files resident on the boot server. The
			dictionary files are downloaded from the boot server whenever the language is
			changed or at boot time when a language other than the internal US English
			language has been configured. If the dictionary files are inaccessible, the language
			will revert to the internal language.
	Note
			Currently, the multilingual feature is only available in the application. At this time,
			the bootROM application is available in English only.
			Configuration changes can performed centrally at the boot server or locally:
Central		Configuration file:		Specify the boot-up language and the selection of language choices
(boot server)		sip.cfg		to be made available to the user.
				• For more information, refer to Multilingual <ml/> on page A-20.
				For instructions on adding new languages, refer to To add new
				languages to those included with the distribution: on page A-21.
Local		Local Phone User		The user can select the preferred language under the Settings menu.
		Interface		Changes are saved to local flash and backed up to <Ethernet
				address>-phone.cfgon the boot server. Changes will permanently
				override global settings unless deleted through the Reset Local
				Config menu selection and the <Ethernet address>-phone.cfgis
				removed from the boot server.

4 - 27