Administrator’s Guide SoundPoint IP / SoundStation IP

 

Permitted

 

 

Attribute

Values

Default

Interpretation

 

 

 

 

call.offeringTimeOut

positive

60

Time in seconds to allow an incoming call to ring

 

integer

 

before dropping the call, 0=infinite.

 

 

 

Note: The call diversion, no answer feature will

 

 

 

take precedence over this feature if enabled. For

 

 

 

more information, refer to No Answer

 

 

 

<noanswer/> on page A-91.

 

 

 

 

call.ringBackTimeOut

positive

60

Time in seconds to allow an outgoing call to

 

integer

 

remain in the ringback state before dropping the

 

 

 

call, 0=infinite.

 

 

 

 

call.dialtoneTimeOut

Null, positive

60

Time in seconds to allow the dialtone to be

 

integer

 

played before dropping the call.

 

 

 

If set to 0, the call is not dropped.

 

 

 

If set to Null, call dropped after 60 seconds.

 

 

 

 

call.lastCallReturnString

string of

*69

The string sent to the server when the user

 

maximum

 

selects the “last call return” action.

 

length 32

 

 

 

 

 

 

call.callsPerLineKey

1 to 24 OR

24 OR

For the SoundPoint IP 600, 601, and 650, the

 

1 to 8

8

permitted range is 1 to 24 and the default is 24.

 

For all other phones the permitted range is 1 to 8

 

 

 

 

 

 

and the default is 8.

 

 

 

This is the number of calls that may be active or

 

 

 

on hold per line key on the phone.

 

 

 

Note that this may be overridden by the

 

 

 

per-registration attribute of

 

 

 

reg.x.callsPerLineKey. Refer to Registration

 

 

 

<reg/> on page A-83.

 

 

 

 

call.stickyAutoLineSeize

Null, 0, 1

0

If set to 1, makes the phone use "sticky" line

 

 

 

seize behavior. This will help with features that

 

 

 

need a second call object to work with. The

 

 

 

phone will attempt to initiate a new outgoing call

 

 

 

on the same SIP line that is currently in focus on

 

 

 

the LCD (this was the behavior in SIP 1.6.5).

 

 

 

If set to 0 or Null, the feature is disabled (this was

 

 

 

the behavior in SIP 1.6.6).

 

 

 

Note: This may fail due to glare issues in which

 

 

 

case the phone may select a different available

 

 

 

line for the call.

 

 

 

 

A - 56

Page 168
Image 168
Polycom SIP 2.2.0 manual Take precedence over this feature if enabled. For, More information, refer to No Answer