Polycom SIP 2.2.0 manual Local Digit Map, Auto-reject

Administrator’s Guide SoundPoint IP / SoundStation IP

Element	Permitted Values	Interpretation
ad	0,1	auto divert
		If set to 1, automatically diverts callers that match the directory entry
		to the address specified in divertcontact.
		Note: If auto-divert is enabled, it has precedence over auto-reject.
ar	0,1	auto-reject
		If set to 1, automatically rejects callers that match the directory entry.
		Note: If auto-divert is also enabled, it has precedence over
		auto-reject.
bw	0,1	buddy watching
		If set to 1, add this contact to the list of watched phones.
bb	0,1	buddy block
		If set to 1, block this contact from watching this phone.

Local Digit Map

The phone has a local digit map feature to automate the setup phase of number-only calls. When properly configured, this feature eliminates the need for using the Dial or Send soft key when making outgoing calls. As soon as a digit pattern matching the digit map is found, the call setup process will complete automatically. The configuration syntax is the same as that specified in 2.1.5 of RFC 3435. The phone behavior when the user dials digits that do not match the digit map is configurable. It is also possible to strip a trailing # from the digits sent or to replace certain matched digits (with the introduction of “R” to the digit map).

Configuration changes can performed centrally at the boot server or locally:

Central	Configuration file:	Specify impossible match behavior, trailing # behavior, digit map
(boot server)	sip.cfg	matching strings, and time out value.
		• For more information, refer to Dial Plan <dialplan/> on page A-16.
	Configuration file:	Specify per-registration impossible match behavior, trailing #
	phone1.cfg	behavior, digit map matching strings, and time out values that
		override those in sip.cfg.
		• For more information, refer to Dial Plan <dialplan/> on page A-93.
Local	Web Server	Specify impossible match behavior, trailing # behavior, digit map
	(if enabled)	matching strings, and time out value.
		Navigate to: http://<phoneIPAddress>/appConf.htm#ls
		Changes are saved to local flash and backed up to <Ethernet
		address>-phone.cfgon the boot server. Changes will permanently
		override global settings unless deleted through the Reset Local
		Config menu selection and the <Ethernet address>-phone.cfgis
		removed from the boot server.

4 - 12