Polycom SIP 2.2.0 Per-Phone Configuration, USB Port usb, Bulk Drive bulkDrive, Parameters include

Administrator’s Guide SoundPoint IP / SoundStation IP

USB Port <usb/>

This attribute’s settings control the USB port.

This configuration attribute is defined as follows:

Attribute	Permitted Values	Default	Interpretation
usb.enable	0, 1	Null	This parameter enables or disables the USB
			port on the phone.

This attribute also includes:

•Bulk Drive <bulkDrive/>

Bulk Drive <bulkDrive/>

These settings control the bulk drive or memory stick.

Attribute	Permitted Values	Default	Interpretation
usb.bulkDrive.enable	0, 1	Null	This parameter enables or disables support for a
			USB bulk drive connected to the USB port on
			the phone.
usb.bulkDrive.name	alphanumeric string	usbDrive	This parameter is a string which specifies the
			name of the mounted USB drive.

Per-Phone Configuration

This section covers the parameters in the per-phone example configuration file phone1.cfg. This file would normally be used as a template for the per-phone configuration files. For more information, refer to Deploying Phones From the Boot Server on page 3-14.

Polycom recommends that you create another file with your organization’s modifications. If you must change any Polycom templates, back them up first.

For more information, refer to the “Configuration File Management on SoundPoint IP Phones” whitepaper at www.polycom.com/support/voice/.

The parameters include:

•Registration <reg/>

•Calls <call/>

•Diversion <divert/>

•Dial Plan <dialplan/>

A - 82