Installation

Screws from UPS panel; 3 on each side reused for PDM

Wire Cover for

Output Conduit

Landing

Figure 10. Mounting the PDM to UPS Rear Panel

7.Insert the bushing (provided with the PDM packaging) into the output conduit landing.

8.Hardwire the input (TB1-1 through TB1-4) terminations for the UPS. See the following hardwired terminations table for specifications. See Figure 11 for a detailed view of the terminal blocks.

9.Insert the wires from the PDM into the output conduit landing and connect to the UPS terminal block according to the following table.

28

Powerware® 9150 User’s Guide : www.powerware.com