Installation

EBC

EBC

EBC Cover Plate (for additional EBCs)

UPS

Battery Cable

Battery Cable

Cover Plate

Battery Connector

Figure 13. Connecting the EBC

7.If additional battery cabinets are used, remove the EBC cover plate on the first battery cabinet. Pull the battery connector out of the EBC, cut the tie-wrap, and discard the cover plate.

Plug the battery cable from the second EBC into the battery connector of the first EBC and secure the cover plate. Follow this procedure for each battery cabinet.

8.Disconnect the safety wire from the circuit breakers on each battery cabinet and switch the breakers to the ON position (see Figure 12).

9.Reinstall the EBC front panel(s).

32

Powerware® 9150 User’s Guide : www.powerware.com