Operation

ConnectUPS

Mounting Bracket

Communication

Cables

Figure 19. Hardware Connections

RS-232 Serial Data Interfaces

The Powerware 9150 is designed to fully comply with LanSafe III/ FailSafe III Power Management Software and OnliNet9 Strategic Power Management Software. If any other software is used, the pin configuration should be verified.

The RS-232 interfaces use 9-pin, D-sub connectors. The information includes data about the utility, the load, and the UPS.

NOTE The RS-232 interface must not be connected to any utility connected circuits. Reinforced insulation to the utility is required. The communications equipment and the UPS should be properly grounded before connecting or disconnecting a communication cable.

Powerware® 9150 User’s Guide : www.powerware.com

47