Powerware 9150 UPS Shutdown

Operation

UPS Shutdown

To shut down the UPS:

1.Remove the front panel. Lift from the bottom of the panel and then pull out (see Figure 17).

2.Turn the Maintenance Bypass switch to the SERVICE or BYPASS position.

3.Turn off the UPS ON/OFF switch (the position).

4.Turn the UPS battery circuit breaker CB1 and optional CB2 to the OFF position.

The UPS stops supplying power and is disconnected internally from the batteries. The load is powered by the utility.

Powerware® 9150 User’s Guide : www.powerware.com 43