TOC | INDEX |
B.4 Publisher Status
The status window is automatically displayed when a job starts. You may also access it at any time by clicking the More Status link under the picture and description of the robot connected. Publisher Status is only available if the Publisher is connected.
•If no errors are present, the green check button will be displayed with a Ready indication to the left.
•If errors are present a red exclamation button will be dis- played with the error explained to the right. At times the entire error will not be visible. Click More Status to view the complete error.
The Status page displays Drive Status, Printer/Robot Arm Status, and Project Status.
Drive Status shows the current status of the drive during a job. The recording progress is displayed on the progress bar along with the total size of the burn and the current amount burned.
Printer/Robot Status shows the current status of the printer if it is printing or the robot if it is moving discs.
The Project Status area of the Publisher Status window shows the current status of the job such as what disc number is print- ing and burning of the total number of disc to produce. From here you may also view a detailed log of the current job, view a log of previous jobs and abort currently running jobs.
To abort a currently running job, click the about button. The publisher will finish its current robotic command and then stop the job.
Queue Project. To queue another project to run after the current one is finished simply setup the project as you normally would. When you get to the third step of the project setup wizard, if a project is currently running a Queue button will appear instead of a Go button. Click it to queue the job.
28Creating Discs
