TOC | INDEX |
4B. Create a Label
1.Click the Create a Label button to open the SureThing CD Labler or Disc Cover program. These programs will allow you create a label.
2.Follow the instructions in Section 3 D or E to create a label using Sure Thing or Disc Cover.
3.Once you have designed the label, save it and close the program. A message will appear asking if you would like to use the label file you just created in your current project. Click Yes to use it in your project. Once you choose your label a preview will be displayed.
5.After selecting your label to print it is important to check the Printer Settings. These settings are dependent upon the specific discs you are using. Each disc (media) brand or type has a different sized non printable outer margin or inner diameter. It also has a different printable surface.
For Primera TuffCoat branded discs simply choose your media from the drop down list, the settings will be adjusted accordingly.
Inner Diameter and Outer Margin (Printable Area). If you have other media, you may need to measure the unprintable outer margin and the inner diameter with a clear millimeter ruler to find the correct size to input here. For the outer margin,
measure from the edge of the disc to the begin- ning of the white print- able surface. For the inner diameter measure from one side of the unprintable hub to the other. The unprintable inner diameter will almost always be larger than the center hole of the discs (15mm).
Creating Discs 19
