Maintenance | Primera Technology 032910-511262 instruction

TOC

INDEX

Section 4: Maintenance and

Troubleshooting

The Publisher is designed to operate for extended periods of time with very little attention. In fact, no regular maintenance is recommended other than cleaning the outside case.

NOTE: Do NOT attempt to oil or grease the Publisher's Robotic Arm shaft or other components. You will likely cause more harm than good! Any moving parts are designed to operate for the life of the machine with no additional lubrication required.

A. CLEANING THE INK CARTRIDGE

It may be necessary to clean the ink cartridge nozzles if you notice reduced print quality, or if you suspect an cartridge nozzle has become slightly dried out or clogged. If you are having print quality problems, follow the steps below:

1.Remove the print cartridge.

2.Moisten a lint-free cloth with water.

3.Hold the cloth against the

nozzles for three seconds. This will “wick” some additional ink onto the damp cloth.

4.Wipe in one direction only.

5.Repeat the process.

52Maintenance and Troubleshooting

Image 56

Primera Technology 032910-511262 user manual Maintenance, Cleaning the INK Cartridge

Contents

For Macintosh and PC Printing History Table of Contents Interactive Feature Getting Started Thank YOU… TOC Choosing a Good Location Unpacking and Inspection Identifying the Parts Front Panel and Top Rear Panel PC System Requirements Overview of Operation TOC TOC Installing the MAC Software SetupInstalling the PC Software Loading Media Discs Hardware SetupApplying Power TOC Select Install the software Connecting the USB 2.0 Cable/Installing the DriverInstalling the Printer Driver Windows XP If you are using a Mac Installing Ink Cartridges Setup the Kiosk BIN Locating Tabs on Creating Discs Tutorial Copy a Disc Print only for Autoprinter Users TOC TOC Copy Project Using PtpublisherProject Types Video Project Data ProjectAudio Project Image Project Add Data Add Print To Select an exiting label Start Project Summary Settings Project Summary Project Options Recording Type Robot Options/Bin Selection Publisher Status Backup Project. PC Disc Publishers Only TOC TOC Rip Audio CD PC Disc Publishers Only TOC Creating a Print Label Using Surething PC Creating a Print Label Using Disc Cover MAC TOC Inspector TOC Advanced Printer Driver Functions PC Paper Size Non-printable Outer MarginPrint Quality Disc Surface Quality Color Matching Ink Saturation Center The Print Image Inner DiameterCartridge Alignment Back Clean/Change Cartridges & Check Ink Levels Clean/PurgeChange Cartridges Details Enable Bi-di Printing Advanced Printer Driver Settings MACDisc Output Location Cartridge to use Kiosk Mode Color Matching Save As Default Restore DefaultsConfig Utility Intensity Clean Cartridge Image Centering Change CartridgeAlignment Calibration Print Disc should look like this Label Design Requirements for Other Graphics Programs Maintenance Cleaning the INK Cartridge Interpreting the PUBLISHER’S Indicators Lights LED Internal Blue LED Lights Technical Support Source Location Technical Specifications Inner Diameter 19, 24, 42 Outer Margin 19, 24, 40 Print Quality 11, 20, 40 Reject Area