TOC | INDEX |
•Outer Margin. Disc from other manufacturers vary widely regarding how far the printable surface extends to the edge of the disc. Measure the distance from the edge of the disc to the start of the white printable area. This will be between 0 and 2 mm in increments of .1mm.
•Inner Diameter. Discs from other manufactures vary widely regarding how for the printable surface extends to the inside of the disc. Measure the distance from one side of the inner unprintable center hub to the other. This will be between 15 mm and 50 mm displayed in increments of
.1mm.
To Create a new label:
1.Click the Create Label button.
2.The label design application SureThing (PC) or Disc Cover (Mac) will open.
Design your label using the included backgrounds and clipart. You may also add your own image. Add text and any other design features.
3.Save your label by going to the File menu - Save as.
4.Close SureThing or Disc Cover.
5.You will be asked if you would like to use the label you just created in your current project. Click Yes.
6.You may now choose to adjust print settings as described above.
Step 3: Start Project (Summary - Settings)
In this step you can verify data and print information and set the number of copies. Optionally you may choose to edit burn settings. However, the default settings are optimized to give you the best quality burn. Simply click “Go” to start the job.
A summary of all the options on this step is listed below.
Project Summary
This areas displays information about the data you have chosen, a thumbnail and file name of the print file you have chosen and picture and description of the Disc Publisher Robot you have chosen. If any of this information is incorrect, use the back arrow at the bottom of the screen to go back to appropriate window to correct it.
