Tutorial Guide:

III.Select the Duplication Speed

This process will allow you to adjust the duplication speed subject to your various needs.

By default, the duplication speed will be set to the optimal speed. However, under some circumstances, you might want to lower down the duplication speed. Those circumstances are as follows:

Poor Blank Media Quality – When your media quality is not good, lowering down the duplication speed is necessary to make good copies.

Poor Master Disc Quality – If your master disc condition is not good, lowering down the duplication speed will reduce the failure rates greatly.

Duplication Quality – Overall, the lower the speed, the higher the quality of your duplicates. If you have time, it is a good choice to lower down the speed to produce the best quality duplicates.

When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready.

DUPLICATOR 1.00

1.COPY

1.Navigate to Speed Selection Menu.

Press UP or DOWN arrow button to navigate to the following screen.

DUPLICATOR 1.00 7.Select Burn Speed

-24 -

Page 28
Image 28
Primera Technology 061605-510800-(01) Tutorial Guide III. Select the Duplication Speed, Navigate to Speed Selection Menu