This function (Disc Info) can be found in the “Utility” menu. This feature will identify your blank recordable Media’s format, capacity, manufacture ID as well as the Media’s certified writing speed.
-This feature only applies to media in the recording trays.
13.2 Prescan
Approximately 50% of failures reported by our duplicator are caused by errors in the master disc which our Reader couldn’t overcome. When this kind of failure occurs, it tends to waste all of your blank recordable medias.
To help detect flaws in the master disc prior to performing the duplicating process, we introduce the “Prescan” feature. This feature will scan and detect any bad sectors existing in the master disc. It is recommended to perform this feature before starting the duplication task for all master discs. By doing so you can prevent wasting the blank media if there is an error in the master disc.
13.3 System Info
By entering this menu, you will be able to see the many specification of your duplicator such as the firmware version, CPU type, RAM capacity. You can check the specifications by pressing UP or DOWN button.
13.4 Device Info
By entering this menu, you will be able to see the information for devices built inside your duplicator. That information includes but limited to manufacture, model number, etc.
13.5 Load Default
This function will reset all of the options back to manufacture’s default. You ca perform this function if your duplicator is acting abnormal. You need to perform “Shutdown” and restart the system in order for this to take effect.
- 71 -
