e.Now, you have a choice to load your master disc into a new (empty) partition or overwrite one of the existing partitions (if any exists) by inputting/modifying the name you desire; or you can simply choose “Auto Generate” to have the system automatically generate a partition name for you. Afterwards, simply press the UP or DOWN arrow button to find your desired selection and press “>>” to submit your selection. You will see the following (unless you have chosen “Auto Generate”, then please skip to Step “h”):
Edit Partition Name
[ | ] OK? |
f.Now, you can name the partition you are about to load into the Hard Drive. To enter the name, you need to use UP or DOWN button to select the character and use “>>” or “<<” button to move the cursor position and once you’ve finished, move the cursor to “OK” and press “>>”. For example, if I want to name the partition of your master disc as “FUN”. Then do the following:
Edit Partition Name
[x | ] OK? |
Make sure the cursor is located at the first position:
ix.Press “DOWN” button consecutively until “F” is displayed.
x.Press “>>” button once to move the cursor to the next position.
- 33 -
