Tutorial Guide:

IV.

Select the Master Reading Source

When you try to make a copy, you need to specify where the master disc is. Is it in the Reader tray? Or is it an Image inside the Hard Drive? This tutorial will show you how to change the Master Reading Source to satisfy your needs.

Basically, there are 3 scenarios that require you to select the Master Reading Source.

Disc-to-Disc copy (Copy from 1st Tray) – This is the case when you would normally make copies on the fly. You need to set the “Reader” as your Master Reading Source.

Hard Drive-to-Disc copy (if Hard Drive installed) – If you want to make copies from your Hard Drive Image, you need to select the source as “Hard Drive”.

There are four benefits to copy from Hard Drive:

i.Performance – Duplicating form the Hard Drive will be able to boost the DVD duplication speed to 8x or above.

ii.Stability – Duplicating from Hard Drive will stabilize the duplication process compared to the Disc to Disc duplicating.

iii.Durability – Hard Drive is a much better storage device than DVD recordable discs. First of all, DVD recordable discs are composed of chemical materials tend to degrade over a period of time while Hard Drives are made of magnetic disks which will last over 100 years. Secondly, DVD recordable discs are often exposed and can very easily be scratched on its surface, while Hard Drives are covered with metal and mounted inside the duplicator.

-27 -

Page 31
Image 31
Primera Technology 061605-510800-(01) user manual Tutorial Guide Select the Master Reading Source