Chapter 2 • Detailed Setup
3
2 
1
Figure
Power receptacle (1), AC POWER switch (2), and circuit breaker reset switch (3)
To power up the projector:
1.Plug the power cord into the Desktop Projector's power receptacle at the rear of the unit.
☞CAUTION! Plug the AC power cord into the Desktop Projector BEFORE connecting it to an electrical outlet. If you plug the power cord into the wall first, you might damage the projector.
2.Connect the power cord to a
3.Move the AC POWER switch to the ON position. The lamp comes on and the projector's fan begins to run. If you do not hear the fan, refer to Chapter 5.
4.Turn on your monitor and computer. To raise or lower the projected image, tilt the mirror assembly to the appropriate angle.
User’s Guide •
