Chapter 5 ATAPI Interface
Page 44 Seagate Travan 40 Product Manual
No. Flag Type Required Host Message Cause
3. Restart the operation.
31 Hardware B C The tape drive has a hardware fault:
1. Turn the tape drive off and on again.
2. Restart the operation.
3. If the problem persists, call the tape drive
supplier helpline. Check the tape drive users
manual for device-specific instructions on turning
the device power on and off.
The drive has a hardware fault
that is not read/write related or
requires a power cycle to
recover.
32 Interface W The tape drive has a problem with the Host
interface:
1. Check the cables and cable connections.
2. Restart the operation.
The drive has identified an
interfacing fault.
33 Eject Media C The operation has failed:
1. Eject the tape.
2. Insert the tape again.
3. Restart the operation.
Error recovery action
34 Download
Fail W The firmware download has failed because you
have tried to use the incorrect firmware for this
tape drive. Obtain the correct firmware and try
again.
Firmware download failed.