Quatech DSE-410D manual Update

The default setting is 255.255.255.255. If you are not using the Paired Mode, we recommend not changing this setting until the application has been tested and is communicating properly. Then you can activate the address-filtering feature.

Update

If using the Server Properties screen for Configuration, click the Update button to store the configuration settings. This also resets the Server. Search to locate the Server with new settings.

If using the Telnet or Console mode, Tab to Save, then press Enter.

There are five options shown at the bottom of the menu, “Save”, “Default”,

“Running”, “Reset” and Status. Use Tab, Backspace, or arrow keys to move the cursor to the option position, and then press Enter.

Save stores the configuration data to DSE-410D flash memory, and resets it.

Default restores the editing configuration data to factory default settings.

Running restores the editing configuration data to the values stored in the flash.

Reset re-boots the DSE-410D saving the change menu settings.

Status displays how many Ethernet packets and serial bytes are transmitted and received. A refresh button is available to update the displayed figures.

Refresh/Space Bar: Press to refresh the configuration page.

Document Number: 940-0186-100 – DSE-410D Owner’s Manual 27

Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000

http://www.quatech.com