5.The Protocol TCP/UDP, IP Address, and Port Number will mirror the settings of the selected serial server.
After setting both DSE-410D Serial Ports as Virtual COM ports, Select Cancel on the Found Server form.
Note: Your PC may have hardware COM ports and devices such as a Modem, IR port or USB-based COM ports that are not currently connected. You may want to select a COM number above COM4 if problems occur.
The default Flow Control setting is None. RTS/CTS can be selected if used by the application program and serial hardware. The DSE-410D Server must be set to match.
The settings of the Virtual COM port in the Device Manager and the DSE-410D Configuration menu must match. If the settings do not match, the Virtual COM port will not work. If these settings are changed in the Device Manager, it will only affect the operation of the Virtual COM port. It will not change the settings stored in the DSE-410D. Use the DSE-410D Manager to change Server Settings.
Document Number: 940-0186-100 – DSE-410D Owner’s Manual | 31 |
Quatech, Inc. - 5675 Hudson Industrial Parkway, Hudson, OH 44236 – 330.655.9000
http://www.quatech.com
