Radio Shack 20-164 Edacs Trunking Setup, UHF-Hi 806-960 MHz To program 800 MHz Motorola trunking

6.If necessary, use the number keys to enter a new Offset frequency and press ENT. The S in Step blinks.

If you try to program an offset frequency in the UHF-Hi bands (806-960 MHz), the scanner ignores the entry.

7.While the S in Step blinks, repeatedly press  or  to select the step number: 5.0, 6.25, 10.0, 12.5, 15.0, 18.75, 20.0, 25.0, 30.0, 31.25, 35.0, 37.5, 40.0, 43.75, or 50.0 kHz, then press ENT.

8. Press PGM.

UHF-Hi (806-960 MHz)

To program 800 MHz Motorola trunking:

1.Press PGM then TRUNK to enter the ID program mode.

2.Press FUNC, then press  or . The bank number increases or decreases by one. If you hold down  or , the bank number increases or decreases continuously.

3.If necessary, repeatedly press MODE to select “Motorola.”

4.Press FUNC then 3. NORMAL appears.

5.Press  or  to select NORMAL or SPLINTER and press ENT. If you are uncertain about the base frequency, use

NORMAL.

The base frequency in NORMAL is 851.0125 MHz. The base frequency in SPLINTER is 851.0000 MHz. . If you cannot receive with the NORMAL setting, change to SPLINTER.

EDACS Trunking Setup

EDACS (GE/Ericsson) systems transmit Talk

G S c g c e s f i l

L

L R p r s t u d

L t

T

1

2

3

4

36