7.For the best reception, adjust the base’s antenna so it stands straight up.
Note: If you want to remove the supplied bracket after attaching it, simply press in the tab on each side of the bracket and lift the bracket away from the base.
Mounting Directly on the Wall
Using a drill (not supplied) and the sup- plied screws and spacers, you can eas- ily mount your
1.At the desired mounting location, drill two holes 315/16 inches apart, one above the other.
315/16”
2.Place a spacer over each screw, then thread a screw into each wall hole until the screw’s head extends about 1/4 inch from the wall.
3.Plug one end of the supplied
11
