Radio Shack TAD-1010 owner manual Fm Page 12 Friday, August 13, 1999 259 PM

43-771.fm Page 12 Friday, August 13, 1999 2:59 PM

4.Insert the tabs on the supplied mounting bracket into the slots on the base’s bottom, then press the bracket down until it snaps into place.

5.Press the AC cord into the top and bottom grooves on the left side of the bracket. Press the modular cord into the top and bottom grooves on the right side of the bracket, then plug the modular cord into a modu- lar phone jack.

6.Line up the keyhole slots on the bracket with the screws on the wall, then slide the base down onto the screws until it is secure.

7.Press up on the handset holder to remove it, turn it over so its tabbed edge faces up, then press it back down into its slot on the base.

TAD-1010

900MHz DIGITAL TELEPHONE • ANSWERING SYSTE

MULTI-USER MAIL BOX

DIGITAL ANSWERING SYST EM

MEMO

ANNC.

MEMORY

8.Plug the TAD-1010’s AC cord into a standard AC outlet.

9.For the best reception, adjust the base’s antenna so it stands straight up.

Note: If you want to remove the sup- plied bracket after attaching it, simply press in the tab on each side of the bracket and lift the bracket away from the base.

12