Non-Commercial | Raymarine Ray215e manual

	Appendix				6-5

	Channel	Frequency (MHz)		Type of Traffic	TX
	Number	TX	RX	Type of Traffic	Power
	Number	TX	RX		Power
	66A	156.325	156.325	Port Operations	Hi, Lo
	67 1	156.375	156.375	Commercial, Bridge-to-Bridge (Intership)	Lo only
	68	156.425	156.425	Non-Commercial	Hi, Lo
	69	156.475	156.475	Non-Commercial	Hi, Lo
	71	156.575	156.575	Non-Commercial	Hi, Lo
	72	156.625	156.625	Non-Commercial (Intership Only)	Hi, Lo
	73	156.675	156.675	Port Operations	Hi, Lo
	74	156.725	156.725	Port Operations	Hi, Lo
	77 3	156.875	156.875	Port Operations (Intership Only)	Lo only
	78A	156.925	156.925	Non-Commercial	Hi, Lo
	79A	156.975	156.975	Commercial	Hi, Lo
	80A	157.025	157.025	Commercial	Hi, Lo
	81A	157.075	157.075	US Government Only: Environmental	Hi, Lo
				Protection Operations
	82A	157.125	157.125	US Government Only	Hi, Lo
	83A	157.175	157.175	US Coast Guard Only	Hi, Lo
	84	157.225	161.825	Public Correspondence (Marine Operator)	Hi, Lo
	85	157.275	161.875	Public Correspondence (Marine Operator)	Hi, Lo
	86	157.325	161.925	Public Correspondence (Marine Operator)	Hi, Lo
	87	157.375	161.975	Public Correspondence (Marine Operator)	Hi, Lo
	88A	157.425	157.425	Commercial (Intership Only)	Hi, Lo

Notes:

1.For channels 13 and 67, output power is fixed at 1W (low power). In an emergency, you can override to high power by pressing and holding PTT and then pressing the MON/1/25 key on the base station. Output power is increased to 25W while both keys are pressed. After MON/1/25 is released, power returns to 1W.

2.Channel 15 is receive only. Transmission is not permitted.

3.For channels 17 and 77, output power is fixed at 1W (low power) only. Transmission at high power is not permitted.

Important Notice

Access to the US frequencies requires a software upgrade. Some countries also require special licensing to activate the US channel set.

Channels 3A, 21A, 23A, 61A, 64A, 81A, 82A, and 83A (shaded) are not for use by the general public in US waters. These frequencies may be used only under authorization by the US Coast Guard or under private land mobile license.

Image 130

Raymarine Ray215e manual Non-Commercial

Contents

Ray215e N e r s H a n d b o o k RAY215E Page License Maritime Mobile Service Identity MmsiAutomatic Transmission Identification System Atis Adjustments or Repair Antenna Mounting and EME Exposure USA RT015 Table of Contents Operation with Full Function Handset Section Maintenance Section Appendix Glossary of Terms Equipment Features Introduction Minimum / Full Function Handset Options Equipment Supplied Optional AccessoriesUnpacking and Inspection Description Planning the Installation Typical Mounting Methods Flush Mounting Front Mounting Rear Mounting Outline and Mounting Dimensions Wire Color Function Connects to DC Power and External Speaker ConnectionsElectrical Connections Power Cable Length External Speaker Connections Nmea Data Requires Full Function Handset Antenna Connections Antenna Mounting Suggestions Grounding Typical Grounding Method DSC and Nmea Operation Minimum / Full Function Handset PriorityOverriding the Full Function Handset Handset Connections Rear Connections Controls VOLUME/PWR KnobControl and LCD Display CH Channel Selection Knob SCAN/ MEM Key Squelch Knob# Multi Key I.C. Key $ MON/ 1/25 Key16 Key DSC/ PRI Key LCD Display ACK indicator Nmea indicatorDSC indicator INT indicator Setting the Squelch Operating ProceduresTurning the Power On Setting the Volume Private Channel Frequency Country CH No Setting the ChannelSelecting the Private Channel TX/RX MHz Use Transmitting Setting the Frequency ModeTo select the Private Channel Priority Channel Selecting a Weather Channel US ModeResetting Factory Defaults Channel Memory Memory Scan Mode All Scan ModeScan Modes Dual Watch Mode Monitor ModeTri-Watch Mode Multi-Call Operation LCD Backlight Function Operation When the Signal is Lost or Becomes Invalid Operation at Power UpNmea Operation Operation When No Signal Detected for 4 Hours Digital Selective Calling DSC Mmsi Number Setup on Base Station Scan Individual Ship’s Call Using a manually input Mmsi numberSending an Individual Ship’s Call DSC + D/L Rotate Using an Mmsi number selected from the phonebook PTT Operation with Minimum Function Handset To store an Mmsi number in phonebook Operation with Minimum Function Handset To delete an Mmsi number from the phonebook When receiving Individual Ship’s Call Receiving an Individual Ship’s Call Sending an All Ships Call All Ships CallReceiving an All Ships Call Group Call Distress Call Sending a Distress Call Receiving a Distress Call Distress Distress Relay Call Atis ID No. Entry Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Controls and LCD Display Indv key SQ UP/DOWN Scroll key ALL Ship keyVOL UP/DOWN key $ MON/TRI key US key Scan keyKey Priv key $* key Call key#9/ 1/25 key IC key PTT Press-to-Talk key Func keyChannel UP/ Down key Distress key TX indicator Func indicatorWX indicator # US indicator Radio Functions Nmea Positional Data Reception Reduced Receiving Sensitivity Local ModeDigital Selective Calling DSC Operation RemoteOperation Using the Function Key Example CH15 INT ⇒ CH15 US ⇒ CH15 INT Receiving on the Weather Channels Using the Channel UP/DOWN keysSelecting the Channel Using the Numeric Keypad Priority Channel Deleting a Channel from Multi-Call Using Multi-CallStoring Channels in Memory Desensitized Reception Local Mode Setting the Transmission Power OutputDeleting Channels from Memory Making a Call from the Base Station Intercom ModeMaking a Call from the Full Function Handset Receiving a Call with the Full Function Handset Receiving a Call at the Base Station Scan ModeEntering a Channel into Memory Using All Scan Using Memory ScanDual-Watch Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship Transmitting an Individual Call To Make an Individual Call to Ship ship-to-ship By Manual Input Response Individual Call to Shore Station Ship-to-ShoreTo make an Individual Call to Shore Station ship-to-shore Indv ENT With manual input, Mmsi number would be displayed Receiving an Individual Call ENT Transmitting a Group Call To make a Group Call Receiving a Group Call Transmitting an All Ships Call To send an All Ships Call Transmitting a Distress Call Unspecified Distress Call Distress Specified Distress Call Message Meaning To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds Receiving a Distress Relay Call ENT or CLR Using the DSC Log To view a log Selecting the Menu Operation Menu OperationAtis Operation Function Purpose Navstat Operation To view current position information DSC Operation To initiate the DSC operation Selecting Distress Call Type Nature Manual Entry of Latitude/Longitude L/L ENT Keys Action Press ENT Modifying the Mmsi Number List Phnbook Modifying the List of Ship Stations Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations Adding Shore Stations to the List ENT Modifying the Mmsi Group Number Group Deleting Shore Stations from the List Entering a Group Mmsi Number Deleting a Group Mmsi Number Setting Operation Setting Atis ID Number To register the Atis Number into memory Keys Action Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset Europe How to Contact RaymarineAccessories and Parts Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 On the Internet Specifications Preventative MaintenanceTransmitter Operating Requirement Radio DimensionsReceiver Base Station Transceiver Optional Ffhs Cradle Optional Full Function Handset FfhsOptional Ffhs External Speaker This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB International Mode Frequency Tables Intership, Port Operations Important Notice US Mode Frequency Table optional US Mode Non-Commercial Weather Channels and Frequencies optional Raymarine Inc