
Operation with Full Function Handset |
"8/M-CALL key
This key inputs the number 8. When an alphanumeric response is appropriate, each press of this key alternately inputs the characters 8, T, U, then V. Pressing the FUNC key followed by the
#9/ 1/25 key
This key inputs the number 9. When an alphanumeric response is appropriate, each press of this key alternately inputs the characters 9, W, X, Y, and then Z. Pressing the FUNC key followed by the 9/ 1/ 25 key alternates the transmission power between 1W and 25W.
$* key
This key inputs an asterisk (*).
Note: The HAIL label over this key does not pertain to the RAY215E.
%0/IC key
This key inputs the number 0. Pressing the FUNC key followed by the 0/IC key starts Intercom mode, which enables conversation between the Minimum Function Handset connected to the port on the front of the base station and a Full Function Handset connected to the port on the rear of the base station. Pressing the FUNC key followed by this key during Intercom mode returns operation to normal mode.
&# key
This key inputs the # character.
Note: The FOG label over this key does not pertain to the RAY215E.
'ENT key
This key performs the Enter function. It is used to confirm and implement an input action. Pressing the FUNC key followed by the ENT/MENU key initiates the Menu mode.
CLR key
Depending on when it is used, this key exits the current mode and reverts to the last used mode or normal operation. This key also can be used to clear any alphanumeric inputs one at a time in the order that they were entered. Pressing the FUNC key followed by CLR/ LOG key initiates the Digital Selective Calling (DSC) Log. Pressing the key during logging returns operation to normal mode.