Operation with Full Function Handset |
•The ATIS ID number is a ten digit number, beginning with a “9”. The MY ATIS set up process has you input only the last 9 digits. The leading “9” is automatically input for you.
To register the ATIS Number into memory:
1.Select the MY ATIS function as described above in Section 4.7.4 Setting Operation.
2.Press the ENT key. The
3.Press ENT. Nine underscore characters appear, which are placeholders for the last 9 digits of the ATIS number. The first character place to be input is flashing.
Pressing the following keys initiate the corresponding operation:
Keys | Action |
0 - 9 keys | Changes the flashing numeric value, then advances to the next |
| digit’s place. |
ENT key | Advances the (flashing) subject item to the next one without |
| changing the numeric value. Advances to the next screen after |
| entering the last (ninth) digit. |
CLR key | Returns to the previous subject item. Pressing and holding for 3 |
| seconds exits the operation and returns to the mode before the |
| Menu Operation began. |
4.Input your ATIS number using the numeric keypad.
5.Press the ENT key. The message ENT - ACCEPT, CLR - EXIT scrolls across the display.
6.Press the ENT key to submit the number. The message ENTER ATIS ID AGAIN is displayed.
7.Press ENT. The nine underscore placeholders appear once more.
8.Again input the ATIS number with the numeric keypad.
9.Press ENT to submit. If the second ATIS number you input matches the first, the message ENT - ACCEPT, CLR - EXIT is again displayed.
