Modifying the Mmsi Number List Phnbook | Raymarine Ray215e instruction

4-46	Operation with Full Function Handset

4.7.3.3Modifying the MMSI Number List (PHNBOOK)

This operation is used to modify the “phonebook” lists of MMSI numbers used for DSC Individual Calls. Two lists are available: one for Ship stations and one for Shore stations. Each list allows you to register the MMSI number and nickname for up to 20 Ship and 20 Shore stations.

Note: The 20 Ship stations and 20 Shore stations in this phonebook are separate from the 10 phonebook entries stored in the base station (see Section 3.5.18.2). All 50 entries are available for you to use.

1.As described in Section 4.7.3 DSC Operation above, select the DSC operation PHNBOOK.

2.Press the ENT key to initiate the process. The 7-segment display shows Phb and the dot matrix display shows SHIP.

ENT

3.Use the SQ UP/DOWN key to select between SHIP or SHORE.

4.Press the ENT key to turn to submit your selection.

Modifying the List of Ship Stations

In this operation, a ship is registered (added) to or deleted from the phonebook list for ship stations.

1.When SHIP is displayed, press the ENT key. The 7-segment display shows SHP, while the dot matrix display shows ENTRY.

2.The list can hold a maximum of 20 entries. If a list is already full or if the list becomes full during this process, the indicator PHNBOOK IS FULL is displayed.

3.To delete an item from the list, use the SQ UP/DOWN key to select DELETE and press the ENT key. If no station has yet been registered, the message PHNBOOK IS EMPTY is displayed.

Image 101

Raymarine Ray215e manual Modifying the Mmsi Number List Phnbook, Modifying the List of Ship Stations

Contents

N e r s H a n d b o o k Ray215e RAY215E Page Automatic Transmission Identification System Atis Maritime Mobile Service Identity MmsiLicense Antenna Mounting and EME Exposure Adjustments or Repair USA RT015 Table of Contents Operation with Full Function Handset Section Appendix Section Maintenance Glossary of Terms Introduction Equipment Features Minimum / Full Function Handset Options Unpacking and Inspection Optional AccessoriesEquipment Supplied Description Typical Mounting Methods Planning the Installation Front Mounting Flush Mounting Rear Mounting Outline and Mounting Dimensions Electrical Connections DC Power and External Speaker ConnectionsWire Color Function Connects to External Speaker Connections Power Cable Length Antenna Connections Nmea Data Requires Full Function Handset Grounding Antenna Mounting Suggestions Typical Grounding Method Overriding the Full Function Handset Minimum / Full Function Handset PriorityDSC and Nmea Operation Rear Connections Handset Connections Control and LCD Display VOLUME/PWR KnobControls CH Channel Selection Knob # Multi Key Squelch KnobSCAN/ MEM Key 16 Key $ MON/ 1/25 KeyI.C. Key DSC/ PRI Key LCD Display DSC indicator Nmea indicatorACK indicator INT indicator Turning the Power On Operating ProceduresSetting the Squelch Setting the Volume Selecting the Private Channel Setting the ChannelPrivate Channel Frequency Country CH No TX/RX MHz Use To select the Private Channel Setting the Frequency ModeTransmitting Resetting Factory Defaults Selecting a Weather Channel US ModePriority Channel Channel Memory Scan Modes All Scan ModeMemory Scan Mode Tri-Watch Mode Monitor ModeDual Watch Mode LCD Backlight Function Multi-Call Operation Nmea Operation Operation at Power UpOperation When the Signal is Lost or Becomes Invalid Digital Selective Calling DSC Operation When No Signal Detected for 4 Hours Mmsi Number Setup on Base Station Scan Sending an Individual Ship’s Call Using a manually input Mmsi numberIndividual Ship’s Call DSC + D/L Rotate PTT Using an Mmsi number selected from the phonebook Operation with Minimum Function Handset Operation with Minimum Function Handset To store an Mmsi number in phonebook To delete an Mmsi number from the phonebook Receiving an Individual Ship’s Call When receiving Individual Ship’s Call Receiving an All Ships Call All Ships CallSending an All Ships Call Group Call Sending a Distress Call Distress Call Distress Receiving a Distress Call Atis ID No. Entry Distress Relay Call Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Indv key Controls and LCD Display VOL UP/DOWN key ALL Ship keySQ UP/DOWN Scroll key $ MON/TRI key Key Scan keyUS key Priv key #9/ 1/25 key Call key$* key IC key Channel UP/ Down key Func keyPTT Press-to-Talk key Distress key WX indicator Func indicatorTX indicator # US indicator Radio Functions Digital Selective Calling DSC Operation Reduced Receiving Sensitivity Local ModeNmea Positional Data Reception RemoteOperation Using the Function Key CH15 INT ⇒ CH15 US ⇒ CH15 INT Example Selecting the Channel Using the Channel UP/DOWN keysReceiving on the Weather Channels Using the Numeric Keypad Priority Channel Storing Channels in Memory Using Multi-CallDeleting a Channel from Multi-Call Deleting Channels from Memory Setting the Transmission Power OutputDesensitized Reception Local Mode Making a Call from the Full Function Handset Intercom ModeMaking a Call from the Base Station Receiving a Call with the Full Function Handset Entering a Channel into Memory Scan ModeReceiving a Call at the Base Station Dual-Watch Using Memory ScanUsing All Scan Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship To Make an Individual Call to Ship ship-to-ship Transmitting an Individual Call By Manual Input To make an Individual Call to Shore Station ship-to-shore Individual Call to Shore Station Ship-to-ShoreResponse Indv ENT With manual input, Mmsi number would be displayed ENT Receiving an Individual Call To make a Group Call Transmitting a Group Call Receiving a Group Call To send an All Ships Call Transmitting an All Ships Call Transmitting a Distress Call Distress Unspecified Distress Call Message Meaning Specified Distress Call To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds ENT or CLR Receiving a Distress Relay Call To view a log Using the DSC Log Atis Operation Menu OperationSelecting the Menu Operation Function Purpose To view current position information Navstat Operation To initiate the DSC operation DSC Operation Selecting Distress Call Type Nature Keys Action Manual Entry of Latitude/Longitude L/L ENT Press ENT Modifying the List of Ship Stations Modifying the Mmsi Number List Phnbook Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations ENT Adding Shore Stations to the List Deleting Shore Stations from the List Modifying the Mmsi Group Number Group Deleting a Group Mmsi Number Entering a Group Mmsi Number Setting Atis ID Number Setting Operation Keys Action To register the Atis Number into memory Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset Accessories and Parts How to Contact RaymarineEurope Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 On the Internet Transmitter Preventative MaintenanceSpecifications Receiver Radio DimensionsOperating Requirement Base Station Transceiver Optional Ffhs External Speaker Optional Full Function Handset FfhsOptional Ffhs Cradle This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB Frequency Tables International Mode Intership, Port Operations Important Notice US Mode US Mode Frequency Table optional Non-Commercial Weather Channels and Frequencies optional Raymarine Inc