Individual Call to Shore Station Ship-to-Shore | Raymarine Ray215e

4-26	Operation with Full Function Handset

Note: Only simplex channels (those channels that transmit and receive on the same frequency) can be selected for ship to ship Individual Calls. Pressing the SQ UP/DOWN key will scroll you through the simplex channels usable for this operation.

Response

If a response is received after pressing the PTT key, a receive-confirmation message is displayed. After 5 seconds have elapsed, the channel is changed to a communication channel and the Individual Ships Call is completed.

ACK		5 sec

If no response is received for 3 minutes after pressing the PTT key, a prompt to press the PTT key appears once more. After 15 seconds elapses without pressing the PTT key following the prompt, operation returns to the state before the call.

		3 min
PTT		NO ACK				PTT

Scrolls every second

4.6.18.2 Individual Call to Shore Station (Ship-to-Shore)

To call a shore station, you must select the specific MMSI number. The MMSI number can be entered manually or selected from a Phonebook list of preprogrammed numbers. Channel 16 is automatically assigned for communications. To cancel the call, press and hold the CLR key for 3 seconds.

To make an Individual Call to Shore Station (ship-to-shore):

1.Select the Shore Station channel.

2.Press the INDV key. Ind appears on the 7-segment display and the DSC indicator is displayed. Pressing the SQ UP/DOWN key alternates between SHIP and SHORE.

Image 81

Raymarine Ray215e manual Individual Call to Shore Station Ship-to-Shore, Response

Contents

N e r s H a n d b o o k Ray215e RAY215E Page Maritime Mobile Service Identity Mmsi LicenseAutomatic Transmission Identification System Atis Antenna Mounting and EME Exposure Adjustments or Repair USA RT015 Table of Contents Operation with Full Function Handset Section Appendix Section Maintenance Glossary of Terms Introduction Equipment Features Minimum / Full Function Handset Options Unpacking and Inspection Optional AccessoriesEquipment Supplied Description Typical Mounting Methods Planning the Installation Front Mounting Flush Mounting Rear Mounting Outline and Mounting Dimensions DC Power and External Speaker Connections Wire Color Function Connects toElectrical Connections External Speaker Connections Power Cable Length Antenna Connections Nmea Data Requires Full Function Handset Grounding Antenna Mounting Suggestions Typical Grounding Method Minimum / Full Function Handset Priority DSC and Nmea OperationOverriding the Full Function Handset Rear Connections Handset Connections Control and LCD Display VOLUME/PWR KnobControls CH Channel Selection Knob Squelch Knob SCAN/ MEM Key# Multi Key 16 Key $ MON/ 1/25 KeyI.C. Key DSC/ PRI Key LCD Display DSC indicator Nmea indicatorACK indicator INT indicator Turning the Power On Operating ProceduresSetting the Squelch Setting the Volume Selecting the Private Channel Setting the ChannelPrivate Channel Frequency Country CH No TX/RX MHz Use Setting the Frequency Mode TransmittingTo select the Private Channel Resetting Factory Defaults Selecting a Weather Channel US ModePriority Channel Channel Memory All Scan Mode Memory Scan ModeScan Modes Monitor Mode Dual Watch ModeTri-Watch Mode LCD Backlight Function Multi-Call Operation Operation at Power Up Operation When the Signal is Lost or Becomes InvalidNmea Operation Digital Selective Calling DSC Operation When No Signal Detected for 4 Hours Mmsi Number Setup on Base Station Scan Using a manually input Mmsi number Individual Ship’s CallSending an Individual Ship’s Call DSC + D/L Rotate PTT Using an Mmsi number selected from the phonebook Operation with Minimum Function Handset Operation with Minimum Function Handset To store an Mmsi number in phonebook To delete an Mmsi number from the phonebook Receiving an Individual Ship’s Call When receiving Individual Ship’s Call All Ships Call Sending an All Ships CallReceiving an All Ships Call Group Call Sending a Distress Call Distress Call Distress Receiving a Distress Call Atis ID No. Entry Distress Relay Call Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Indv key Controls and LCD Display VOL UP/DOWN key ALL Ship keySQ UP/DOWN Scroll key $ MON/TRI key Key Scan keyUS key Priv key #9/ 1/25 key Call key$* key IC key Channel UP/ Down key Func keyPTT Press-to-Talk key Distress key WX indicator Func indicatorTX indicator # US indicator Radio Functions Digital Selective Calling DSC Operation Reduced Receiving Sensitivity Local ModeNmea Positional Data Reception RemoteOperation Using the Function Key CH15 INT ⇒ CH15 US ⇒ CH15 INT Example Using the Channel UP/DOWN keys Receiving on the Weather ChannelsSelecting the Channel Using the Numeric Keypad Priority Channel Using Multi-Call Deleting a Channel from Multi-CallStoring Channels in Memory Setting the Transmission Power Output Desensitized Reception Local ModeDeleting Channels from Memory Making a Call from the Full Function Handset Intercom ModeMaking a Call from the Base Station Receiving a Call with the Full Function Handset Scan Mode Receiving a Call at the Base StationEntering a Channel into Memory Using Memory Scan Using All ScanDual-Watch Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship To Make an Individual Call to Ship ship-to-ship Transmitting an Individual Call By Manual Input Individual Call to Shore Station Ship-to-Shore ResponseTo make an Individual Call to Shore Station ship-to-shore Indv ENT With manual input, Mmsi number would be displayed ENT Receiving an Individual Call To make a Group Call Transmitting a Group Call Receiving a Group Call To send an All Ships Call Transmitting an All Ships Call Transmitting a Distress Call Distress Unspecified Distress Call Message Meaning Specified Distress Call To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds ENT or CLR Receiving a Distress Relay Call To view a log Using the DSC Log Atis Operation Menu OperationSelecting the Menu Operation Function Purpose To view current position information Navstat Operation To initiate the DSC operation DSC Operation Selecting Distress Call Type Nature Keys Action Manual Entry of Latitude/Longitude L/L ENT Press ENT Modifying the List of Ship Stations Modifying the Mmsi Number List Phnbook Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations ENT Adding Shore Stations to the List Deleting Shore Stations from the List Modifying the Mmsi Group Number Group Deleting a Group Mmsi Number Entering a Group Mmsi Number Setting Atis ID Number Setting Operation Keys Action To register the Atis Number into memory Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset Accessories and Parts How to Contact RaymarineEurope Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 On the Internet Preventative Maintenance SpecificationsTransmitter Receiver Radio DimensionsOperating Requirement Base Station Transceiver Optional Full Function Handset Ffhs Optional Ffhs CradleOptional Ffhs External Speaker This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB Frequency Tables International Mode Intership, Port Operations Important Notice US Mode US Mode Frequency Table optional Non-Commercial Weather Channels and Frequencies optional Raymarine Inc