Operation with Minimum Function Handset |
4.Press the DSC/PRI key once to accept. The small character display now shows a “2”, designating the second digit in your MMSI number.
5.Rotate the Channel Select (CH) knob until the second digit of your MMSI number appears in the large channel display.
6.Press the DSC/PRI key once to accept.
7.Enter all 9 digits of the MMSI number in the same way.
Once the 9th digit has been entered and accepted, the RAY215E plays back the 9 digits (one digit at a time) to verify proper entry.
Note: Ensure the MMSI number entered is correct with this verification playback. Once the number is accepted as outlined in the next step, it cannot be changed except by Raymarine factory representatives.
8.If the number is verified as correct, press and hold the DSC/PRI key for 2 seconds and a tone sounds. Your MMSI number has now been stored in memory.
If the number is incorrect, press the DSC/PRI key once and release. The radio will revert to the beginning of the entry process to start over again. This step can be repeated as many times as required until the number is entered correctly.
|
| PRESS & HOLD | PRESS & REL |
| ||||||||
|
| DSC + D/L | SCAN | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MMSI digit digit position | ||
ROTATE |
| PRESS & REL | ROTATE | |||||||||
CH |
| |||||||||||
| DSC |
| CH |
| ||||||||
|
| |||||||||||
| Select desired digit |
|
|
|
| Next digit position |
| Select desired digit | ||||
PRESS & REL | ROTATE | PRESS & REL | ||||||||||
DSC |
|
|
|
| CH |
| DSC |
| ||||
| Continue thru last digit position |
|
|
|
| Select desired digit |
| Radio replays all digits... | ||||
|
|
| PRESS & HOLD |
|
|
| ||||||
|
|
|
|
|
| |||||||
|
|
| DSC |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| MMSI number accepted | ||
|
|
|
|
|
|
|
|
|
| Returns to working channel | ||
|
|
|
|
|
|
|
|
|
|
|
| |
| ...through the 9th position |
| PRESS & REL |
|
|
| ||||||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| DSC |
| Returns to first digit position | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
