Manual Entry of Latitude/Longitude L/L ENT | Raymarine Ray215e

4-44	Operation with Full Function Handset

4.7.3.2Manual Entry of Latitude/Longitude (L/L ENT)

This operation is used to manually enter the latitude/longitude and UTC time when normal NMEA input of the position information is not available. The radio will sound a 5-second-long alert tone every four hours to remind you to update your position.

1.As described in Section 4.7.3 DSC Operation above, select the DSC operation L/L ENT. The 7-segment display shows L L, while the dot matrix display shows the latest latitude data.

2.Press one of the following keys to initiate the corresponding operation:

Keys	Action
0 - 9 keys	Changes the flashing numeric value (see step 3), then
	advances to the next digit’s place.

ENT key	Advances from Latitude, to Longitude, to UTC.
CLR key	Returns to the previous subject item.

SQ UP/	For Latitude, alternates between N and S.
DOWN key	For Longitude, alternates between E and W.
	For UTC, no effect.

3.The subject items can be changed in the following order. Numeric values that can be changed are flashing:

1.	Degrees of lat at ten’s place	8.	Minutes of lon at ten’s place
2.	Degrees of lat at unit’s place	9.	Minutes of lon at unit’s place
3.	Minutes of lat at ten’s place	10.	Hours of UTC at ten’s place
4.	Minutes of lat at unit’s place	11.	Hours of UTC at unit’s place
5.	Degrees of lon at hundred’s place	12.	Minutes of UTC at ten’s place
6.	Degrees of lon at ten’s place	13.	Minutes of UTC at unit’s place

7.Degrees of lon at unit’s place

4.After changing the subject item, the display scrolls from latitude to longitude to UTC. To submit the change of the position data as shown in the display, press the ENT key. The unit exits Menu mode and returns to normal operation.

To exit the Menu operation, press and hold the CLR key for 3 seconds. The following illustration shows an example of the operation:

Image 99

Raymarine Ray215e manual Manual Entry of Latitude/Longitude L/L ENT, Keys Action

Contents

N e r s H a n d b o o k Ray215e RAY215E Page Maritime Mobile Service Identity Mmsi LicenseAutomatic Transmission Identification System Atis Antenna Mounting and EME Exposure Adjustments or Repair USA RT015 Table of Contents Operation with Full Function Handset Section Appendix Section Maintenance Glossary of Terms Introduction Equipment Features Minimum / Full Function Handset Options Description Optional AccessoriesUnpacking and Inspection Equipment Supplied Typical Mounting Methods Planning the Installation Front Mounting Flush Mounting Rear Mounting Outline and Mounting Dimensions DC Power and External Speaker Connections Wire Color Function Connects toElectrical Connections External Speaker Connections Power Cable Length Antenna Connections Nmea Data Requires Full Function Handset Grounding Antenna Mounting Suggestions Typical Grounding Method Minimum / Full Function Handset Priority DSC and Nmea OperationOverriding the Full Function Handset Rear Connections Handset Connections CH Channel Selection Knob VOLUME/PWR KnobControl and LCD Display Controls Squelch Knob SCAN/ MEM Key# Multi Key DSC/ PRI Key $ MON/ 1/25 Key16 Key I.C. Key LCD Display INT indicator Nmea indicatorDSC indicator ACK indicator Setting the Volume Operating ProceduresTurning the Power On Setting the Squelch TX/RX MHz Use Setting the ChannelSelecting the Private Channel Private Channel Frequency Country CH No Setting the Frequency Mode TransmittingTo select the Private Channel Channel Memory Selecting a Weather Channel US ModeResetting Factory Defaults Priority Channel All Scan Mode Memory Scan ModeScan Modes Monitor Mode Dual Watch ModeTri-Watch Mode LCD Backlight Function Multi-Call Operation Operation at Power Up Operation When the Signal is Lost or Becomes InvalidNmea Operation Digital Selective Calling DSC Operation When No Signal Detected for 4 Hours Mmsi Number Setup on Base Station Scan Using a manually input Mmsi number Individual Ship’s CallSending an Individual Ship’s Call DSC + D/L Rotate PTT Using an Mmsi number selected from the phonebook Operation with Minimum Function Handset Operation with Minimum Function Handset To store an Mmsi number in phonebook To delete an Mmsi number from the phonebook Receiving an Individual Ship’s Call When receiving Individual Ship’s Call All Ships Call Sending an All Ships CallReceiving an All Ships Call Group Call Sending a Distress Call Distress Call Distress Receiving a Distress Call Atis ID No. Entry Distress Relay Call Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Indv key Controls and LCD Display $ MON/TRI key ALL Ship keyVOL UP/DOWN key SQ UP/DOWN Scroll key Priv key Scan keyKey US key IC key Call key#9/ 1/25 key $* key Distress key Func keyChannel UP/ Down key PTT Press-to-Talk key # US indicator Func indicatorWX indicator TX indicator Radio Functions RemoteOperation Reduced Receiving Sensitivity Local ModeDigital Selective Calling DSC Operation Nmea Positional Data Reception Using the Function Key CH15 INT ⇒ CH15 US ⇒ CH15 INT Example Using the Channel UP/DOWN keys Receiving on the Weather ChannelsSelecting the Channel Using the Numeric Keypad Priority Channel Using Multi-Call Deleting a Channel from Multi-CallStoring Channels in Memory Setting the Transmission Power Output Desensitized Reception Local ModeDeleting Channels from Memory Receiving a Call with the Full Function Handset Intercom ModeMaking a Call from the Full Function Handset Making a Call from the Base Station Scan Mode Receiving a Call at the Base StationEntering a Channel into Memory Using Memory Scan Using All ScanDual-Watch Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship To Make an Individual Call to Ship ship-to-ship Transmitting an Individual Call By Manual Input Individual Call to Shore Station Ship-to-Shore ResponseTo make an Individual Call to Shore Station ship-to-shore Indv ENT With manual input, Mmsi number would be displayed ENT Receiving an Individual Call To make a Group Call Transmitting a Group Call Receiving a Group Call To send an All Ships Call Transmitting an All Ships Call Transmitting a Distress Call Distress Unspecified Distress Call Message Meaning Specified Distress Call To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds ENT or CLR Receiving a Distress Relay Call To view a log Using the DSC Log Function Purpose Menu OperationAtis Operation Selecting the Menu Operation To view current position information Navstat Operation To initiate the DSC operation DSC Operation Selecting Distress Call Type Nature Keys Action Manual Entry of Latitude/Longitude L/L ENT Press ENT Modifying the List of Ship Stations Modifying the Mmsi Number List Phnbook Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations ENT Adding Shore Stations to the List Deleting Shore Stations from the List Modifying the Mmsi Group Number Group Deleting a Group Mmsi Number Entering a Group Mmsi Number Setting Atis ID Number Setting Operation Keys Action To register the Atis Number into memory Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 How to Contact RaymarineAccessories and Parts Europe On the Internet Preventative Maintenance SpecificationsTransmitter Base Station Transceiver Radio DimensionsReceiver Operating Requirement Optional Full Function Handset Ffhs Optional Ffhs CradleOptional Ffhs External Speaker This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB Frequency Tables International Mode Intership, Port Operations Important Notice US Mode US Mode Frequency Table optional Non-Commercial Weather Channels and Frequencies optional Raymarine Inc