Operation with Full Function Handset |
Deleting Channels from Memory
From the Working Channel mode, select the channel to be deleted. Press the FUNC key followed by the 1/MEM key. The MEM indicator disappears when the channel is deleted.
4.6.11Setting the Transmission Power Output
The transmission output can be set at either 1W or 25W. When the power supply is switched on, the output is 25W. Pressing the FUNC key followed by the 9/1/25 key alternates the transmission between 25W and 1W.
The choice of power output is dependent upon the distance of transmission and transmitting conditions. Some channels are fixed at the 1W setting.
When 1W is selected, the 1W indicator is displayed on the LCD. When 25W is selected the 1W indicator disappears.
4.6.12Desensitized Reception (Local Mode)
You can set the RAY215E to reduce the receiving sensitivity in high traffic areas to decrease unwanted reception. This is also known as local mode.
To select this mode, press the FUNC key followed by the 7/D/L key. While the desensitize function (local mode) is active, the DESENS indicator appears in the LCD display. To return to full receiver sensitivity (distant mode), again press the FUNC 7/D/L key combination.
4.6.13LCD Backlight Function
LCD backlight brightness can be set at four different levels. Press the FUNC/DIM key two times to enter Dimmer mode. Each successive click of the FUNC/DIM key alternates the brightness from Off, to Low, to Medium, to High, then back to Off. As the backlight setting is changed, the dot matrix indicator displays the following messages: DIM OFF for the Off setting, DIM LOW for Low, DIM MID for Medium, and DIM HI for High.
When the ENT or CLR keys are pressed or when no other key operation is made for 5 seconds, the current state is accepted and stored in memory, and the backlight setting operation is complete. The next time the power supply is switched on, the state of the backlight is recalled and is applied to each handset individually.
When selecting the DIM OFF setting or pressing any key while in DIM OFF mode, the display is lit at the DIM LOW setting for 5 seconds and then turned off. This is so you can view the display in low light conditions.
