Press and hold CLR 3 seconds | Raymarine Ray215e specification

Operation with Full Function Handset

4-37

5.When this prompt appears, release the DISTRESS key. The unit is switched to Channel 16, displays the message AWAIT ACK, and monitors channel 70 for an acknowledgment.

release

DISTRESS

dSr stops flashing and the distress alarm sounds continuously. The unit retransmits the DISTRESS call at random intervals of 3.5 to 4.5 minutes, until a response is received or the call is manually cancelled.

To cancel the DISTRESS call, press the CLR key and hold for 3 seconds. The call is cancelled and the unit returns to the state before the call.

press and hold CLR 3 seconds

When a response is received, the DSC indicator flashes and the DSC Distress alert is sounded. The LCD scrolls a message that the DISTRESS has been acknowledged, along with the sending station’s MMSI number. The message and alert are repeated until the CLR key is pressed.

When the CLR key is pressed, the unit exits the DSC mode and continues monitoring Channel 16. Regardless of the handset state, the DSC Distress alert is sounded at maximum volume on the external speaker.

4.6.18.9 Receiving a Distress Call

When a Distress call is received, the DSC indicator flashes, dSr appears on the 7-segment display, and the DSC Distress alert is sounded. On the dot matrix display are scrolled RECEIVED, DISTRESS, the type of distress, the MMSI number, the transmitting time, the latitude, and longitude of the transmitting station.

The DSC Distress Alert and the displayed message continue until either ENT or CLR are pressed. Pressing ENT stores the contents of the call in the log and switches the radio to Channel 16. Pressing CLR also logs the call but then reverts the radio to the mode before receiving the Distress call.

Image 92

Raymarine Ray215e manual Press and hold CLR 3 seconds

Contents

Ray215e N e r s H a n d b o o k RAY215E Page Automatic Transmission Identification System Atis Maritime Mobile Service Identity MmsiLicense Adjustments or Repair Antenna Mounting and EME Exposure USA RT015 Table of Contents Operation with Full Function Handset Section Maintenance Section Appendix Glossary of Terms Equipment Features Introduction Minimum / Full Function Handset Options Optional Accessories Unpacking and InspectionEquipment Supplied Description Planning the Installation Typical Mounting Methods Flush Mounting Front Mounting Rear Mounting Outline and Mounting Dimensions Electrical Connections DC Power and External Speaker ConnectionsWire Color Function Connects to Power Cable Length External Speaker Connections Nmea Data Requires Full Function Handset Antenna Connections Antenna Mounting Suggestions Grounding Typical Grounding Method Overriding the Full Function Handset Minimum / Full Function Handset PriorityDSC and Nmea Operation Handset Connections Rear Connections VOLUME/PWR Knob Control and LCD DisplayControls CH Channel Selection Knob # Multi Key Squelch KnobSCAN/ MEM Key $ MON/ 1/25 Key 16 KeyI.C. Key DSC/ PRI Key LCD Display Nmea indicator DSC indicatorACK indicator INT indicator Operating Procedures Turning the Power OnSetting the Squelch Setting the Volume Setting the Channel Selecting the Private ChannelPrivate Channel Frequency Country CH No TX/RX MHz Use To select the Private Channel Setting the Frequency ModeTransmitting Selecting a Weather Channel US Mode Resetting Factory DefaultsPriority Channel Channel Memory Scan Modes All Scan ModeMemory Scan Mode Tri-Watch Mode Monitor ModeDual Watch Mode Multi-Call Operation LCD Backlight Function Nmea Operation Operation at Power UpOperation When the Signal is Lost or Becomes Invalid Operation When No Signal Detected for 4 Hours Digital Selective Calling DSC Mmsi Number Setup on Base Station Scan Sending an Individual Ship’s Call Using a manually input Mmsi numberIndividual Ship’s Call DSC + D/L Rotate Using an Mmsi number selected from the phonebook PTT Operation with Minimum Function Handset To store an Mmsi number in phonebook Operation with Minimum Function Handset To delete an Mmsi number from the phonebook When receiving Individual Ship’s Call Receiving an Individual Ship’s Call Receiving an All Ships Call All Ships CallSending an All Ships Call Group Call Distress Call Sending a Distress Call Receiving a Distress Call Distress Distress Relay Call Atis ID No. Entry Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Controls and LCD Display Indv key ALL Ship key VOL UP/DOWN keySQ UP/DOWN Scroll key $ MON/TRI key Scan key KeyUS key Priv key Call key #9/ 1/25 key$* key IC key Func key Channel UP/ Down keyPTT Press-to-Talk key Distress key Func indicator WX indicatorTX indicator # US indicator Radio Functions Reduced Receiving Sensitivity Local Mode Digital Selective Calling DSC OperationNmea Positional Data Reception RemoteOperation Using the Function Key Example CH15 INT ⇒ CH15 US ⇒ CH15 INT Selecting the Channel Using the Channel UP/DOWN keysReceiving on the Weather Channels Using the Numeric Keypad Priority Channel Storing Channels in Memory Using Multi-CallDeleting a Channel from Multi-Call Deleting Channels from Memory Setting the Transmission Power OutputDesensitized Reception Local Mode Intercom Mode Making a Call from the Full Function HandsetMaking a Call from the Base Station Receiving a Call with the Full Function Handset Entering a Channel into Memory Scan ModeReceiving a Call at the Base Station Dual-Watch Using Memory ScanUsing All Scan Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship Transmitting an Individual Call To Make an Individual Call to Ship ship-to-ship By Manual Input To make an Individual Call to Shore Station ship-to-shore Individual Call to Shore Station Ship-to-ShoreResponse Indv ENT With manual input, Mmsi number would be displayed Receiving an Individual Call ENT Transmitting a Group Call To make a Group Call Receiving a Group Call Transmitting an All Ships Call To send an All Ships Call Transmitting a Distress Call Unspecified Distress Call Distress Specified Distress Call Message Meaning To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds Receiving a Distress Relay Call ENT or CLR Using the DSC Log To view a log Menu Operation Atis OperationSelecting the Menu Operation Function Purpose Navstat Operation To view current position information DSC Operation To initiate the DSC operation Selecting Distress Call Type Nature Manual Entry of Latitude/Longitude L/L ENT Keys Action Press ENT Modifying the Mmsi Number List Phnbook Modifying the List of Ship Stations Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations Adding Shore Stations to the List ENT Modifying the Mmsi Group Number Group Deleting Shore Stations from the List Entering a Group Mmsi Number Deleting a Group Mmsi Number Setting Operation Setting Atis ID Number To register the Atis Number into memory Keys Action Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset How to Contact Raymarine Accessories and PartsEurope Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 On the Internet Transmitter Preventative MaintenanceSpecifications Radio Dimensions ReceiverOperating Requirement Base Station Transceiver Optional Ffhs External Speaker Optional Full Function Handset FfhsOptional Ffhs Cradle This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB International Mode Frequency Tables Intership, Port Operations Important Notice US Mode Frequency Table optional US Mode Non-Commercial Weather Channels and Frequencies optional Raymarine Inc