Raymarine Ray215e 4.7 Menu Operation

4-40 Operation with Full Function Handset

The RAY215E comes equipped with Automatic Transmission

Identification System (ATIS) capability for inland waterway requirements

in Europe. With ATIS enabled, each time the PTT key is pressed your

station ID is sent at the end of the transmission. Before utilizing this feature,

you must obtain an ID number, program it into the RAY215E’s system

Menu, and activate the ATIS feature. Once activated, A TIS can be enabled

or disabled in the system Menu so that the RAY215E can be used in open

water or inland waterways.

See Section 4.7.4.1 for instructions on programming the ATIS ID number

into the radio, and Section 4.7.4.3 for directions on how to toggle the

ATIS function on and off.

4.7 Menu Operation

The menu operation is used for making various settings and confirming

the current state. The operation is roughly divided in three functions as

follows:

FunctionFunction

Function PurposePurpose

PurposePurpose

Purpose

1. NAVSTA Indicates the information input from NMEA.

2. DSC To register/modify various settings related to DSC.

3. SETTINGTo program t he MMSI num ber, to program the ATIS ID

number and to set the operation mode of ATIS

To initiate the Menu function:

1. Press the FUNC key followed by the MENU key. Mn appears on the

7-segment display and NAVSTAT is shown on the dot matrix display.

2. To scroll through these first level menu items, press the SQ UP/DOWN

key. The indicators alternate between NAVST AT, DSC, and SETTING .

3. Select the desired operation and press the ENT key to enter that

particular menu item.

To exit the Menu operation, press and hold the CLR key for 3 seconds.