Unpacking and Inspection, Equipment Supplied | Raymarine Ray215e

Installation	2-1
Section 2	Installation

2.1Unpacking and Inspection

Use care when unpacking the unit from the shipping carton to prevent damage to the contents. It is also good practice to save the carton and the interior packing material in the event you must return the unit to the factory.

2.2Equipment Supplied

The following is a list of materials supplied with the RAY215E:

Description	Part No.
RAY215E Radiotelephone	E43004
Minimum Function Handset with Cradle	E49016
Power/Optional Speaker/NMEA Cable	R49017
Mounting Yoke	R49011
Yoke Knob	R49012
Handbook, RAY215E	E49018
Sun Cover	R49014

2.2.1 Optional Accessories

The following is a list of options available for the RAY215E:

Description	Part No.
Single Station:	E46020
Full Function Handset with Cradle
Second Station:	E46022
Full Function Handset with Cradle
7 meter Handset Extension Cable
External Powered Handset Speaker
Handset/Microphone Relocation Kit	E46026
5m Extension Cable, Full Function Handset	E46018
10m Extension Cable, Full Function Handset	E46017
3m Extension Cable, External Speaker	E46015
External 10W Speaker	E46006
Flush Mounting Kit	E46023
8' Fiberglass VHF Antenna	M51118E

Image 14

Raymarine Ray215e manual Unpacking and Inspection, Equipment Supplied, Optional Accessories, Description

Contents

Ray215e N e r s H a n d b o o k RAY215E Page Automatic Transmission Identification System Atis Maritime Mobile Service Identity MmsiLicense Adjustments or Repair Antenna Mounting and EME Exposure USA RT015 Table of Contents Operation with Full Function Handset Section Maintenance Section Appendix Glossary of Terms Equipment Features Introduction Minimum / Full Function Handset Options Equipment Supplied Optional AccessoriesUnpacking and Inspection Description Planning the Installation Typical Mounting Methods Flush Mounting Front Mounting Rear Mounting Outline and Mounting Dimensions Electrical Connections DC Power and External Speaker ConnectionsWire Color Function Connects to Power Cable Length External Speaker Connections Nmea Data Requires Full Function Handset Antenna Connections Antenna Mounting Suggestions Grounding Typical Grounding Method Overriding the Full Function Handset Minimum / Full Function Handset PriorityDSC and Nmea Operation Handset Connections Rear Connections Controls VOLUME/PWR KnobControl and LCD Display CH Channel Selection Knob # Multi Key Squelch KnobSCAN/ MEM Key I.C. Key $ MON/ 1/25 Key16 Key DSC/ PRI Key LCD Display ACK indicator Nmea indicatorDSC indicator INT indicator Setting the Squelch Operating ProceduresTurning the Power On Setting the Volume Private Channel Frequency Country CH No Setting the ChannelSelecting the Private Channel TX/RX MHz Use To select the Private Channel Setting the Frequency ModeTransmitting Priority Channel Selecting a Weather Channel US ModeResetting Factory Defaults Channel Memory Scan Modes All Scan ModeMemory Scan Mode Tri-Watch Mode Monitor ModeDual Watch Mode Multi-Call Operation LCD Backlight Function Nmea Operation Operation at Power UpOperation When the Signal is Lost or Becomes Invalid Operation When No Signal Detected for 4 Hours Digital Selective Calling DSC Mmsi Number Setup on Base Station Scan Sending an Individual Ship’s Call Using a manually input Mmsi numberIndividual Ship’s Call DSC + D/L Rotate Using an Mmsi number selected from the phonebook PTT Operation with Minimum Function Handset To store an Mmsi number in phonebook Operation with Minimum Function Handset To delete an Mmsi number from the phonebook When receiving Individual Ship’s Call Receiving an Individual Ship’s Call Receiving an All Ships Call All Ships CallSending an All Ships Call Group Call Distress Call Sending a Distress Call Receiving a Distress Call Distress Distress Relay Call Atis ID No. Entry Operation with Minimum Function Handset MON Operation with Optional Full Function Handset Operation with Full Function Handset Controls and LCD Display Indv key SQ UP/DOWN Scroll key ALL Ship keyVOL UP/DOWN key $ MON/TRI key US key Scan keyKey Priv key $* key Call key#9/ 1/25 key IC key PTT Press-to-Talk key Func keyChannel UP/ Down key Distress key TX indicator Func indicatorWX indicator # US indicator Radio Functions Nmea Positional Data Reception Reduced Receiving Sensitivity Local ModeDigital Selective Calling DSC Operation RemoteOperation Using the Function Key Example CH15 INT ⇒ CH15 US ⇒ CH15 INT Selecting the Channel Using the Channel UP/DOWN keysReceiving on the Weather Channels Using the Numeric Keypad Priority Channel Storing Channels in Memory Using Multi-CallDeleting a Channel from Multi-Call Deleting Channels from Memory Setting the Transmission Power OutputDesensitized Reception Local Mode Making a Call from the Base Station Intercom ModeMaking a Call from the Full Function Handset Receiving a Call with the Full Function Handset Entering a Channel into Memory Scan ModeReceiving a Call at the Base Station Dual-Watch Using Memory ScanUsing All Scan Tri-Watch Operation at Power Up Individual Call to Another Ship Ship-to-Ship Transmitting an Individual Call To Make an Individual Call to Ship ship-to-ship By Manual Input To make an Individual Call to Shore Station ship-to-shore Individual Call to Shore Station Ship-to-ShoreResponse Indv ENT With manual input, Mmsi number would be displayed Receiving an Individual Call ENT Transmitting a Group Call To make a Group Call Receiving a Group Call Transmitting an All Ships Call To send an All Ships Call Transmitting a Distress Call Unspecified Distress Call Distress Specified Distress Call Message Meaning To make a Distress Call specifying the type of distress Press and hold CLR 3 seconds Receiving a Distress Relay Call ENT or CLR Using the DSC Log To view a log Selecting the Menu Operation Menu OperationAtis Operation Function Purpose Navstat Operation To view current position information DSC Operation To initiate the DSC operation Selecting Distress Call Type Nature Manual Entry of Latitude/Longitude L/L ENT Keys Action Press ENT Modifying the Mmsi Number List Phnbook Modifying the List of Ship Stations Adding Ship Stations to the List Deleting Ship Stations from the List Modifying the List of Shore Stations Adding Shore Stations to the List ENT Modifying the Mmsi Group Number Group Deleting Shore Stations from the List Entering a Group Mmsi Number Deleting a Group Mmsi Number Setting Operation Setting Atis ID Number To register the Atis Number into memory Keys Action Numeric keypad Setting Mmsi Number Next digit’s place Input Mmsi number Using numeric keypad Atis Set Up Operation with Full Function Handset Europe How to Contact RaymarineAccessories and Parts Technical Support Tel +44 0 23 9269 Fax +44 0 23 9269 On the Internet Transmitter Preventative MaintenanceSpecifications Operating Requirement Radio DimensionsReceiver Base Station Transceiver Optional Ffhs External Speaker Optional Full Function Handset FfhsOptional Ffhs Cradle This page intentionally left blank Drawings Assembly Drawing Block Diagram Control PCB Front PCB International Mode Frequency Tables Intership, Port Operations Important Notice US Mode Frequency Table optional US Mode Non-Commercial Weather Channels and Frequencies optional Raymarine Inc