Connections & Setup

Using the Power Supply

The power supply attaches to the camcorder and lets you power it directly from standard household power. The power supply operates on 110-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery.

1.Plug the small end of the power supply into the DC IN jack on the camcorder.

2.Plug the other end of the power supply into a working AC outlet (110-240V, 50/ 60Hz).

Caution: Never use this power supply for any purpose other than charging the FB1260 or supplying power to the camcorder.

DC IN jack

2

AC power supply

+

+

 

ADY PIX/

TBC

STE

 

 

 

 

 

L

 

 

DIGITA UT)

 

 

(DSC IN/O

 

A

F

F

O

Y

A

L

P

1

Removing the power supply

1.Make sure the Power switch is set to OFF.

2.Unplug the power supply from the AC outlet.

3.Unplug the small end of the power supply from the DC IN jack on the camcorder.

Important: Before detaching the power source, make sure the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction.

Using an Optional Plug Adapter in Foreign Countries

An optional plug adapter might be required in some countries.

1.Plug the power supply’s plug into the AC plug adapter.

2.Plug the AC plug adapter into the AC outlet.

20

Chapter 1

Page 22
Image 22
RCA CC6394 manual Using the Power Supply, Removing the power supply, Using an Optional Plug Adapter in Foreign Countries