Other Information
Rewinding or fast-forwarding can’t be performed.
The tape is already fully wound on one reel or the other.
The picture is blurred in the Quick Review or Retake mode.
This is normal while recording in the SLP mode. Some noise may be present while recording in the SP mode.
The date and time displays disappear.
If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder’s power off before disconnecting the power source.
The wrong date and time are displayed/recorded.
If you have not performed Date/Time Setting (see page 22), the date and time are not displayed/recorded correctly. Be sure that Date/Time setting is carried out.
The tape won’t eject.
The battery pack is running low.
If the LCD monitor is not open more than 60˚, the EJECT switch does not function.
Chapter 7 | 97 |
