![](/images/new-backgrounds/1261655/261655207x1.webp)
Other Information
Care and Cleaning
After Using the Camcorder
1.Set the Power switch to OFF.
2.Open the LCD monitor at least 60˚.
3.Slide the EJECT switch to open the cassette tape holder, then remove the tape.
4.Press the area marked CLOSE to close and lock the cassette tape holder.
5.Close and lock the LCD monitor.
6.Slide the BATTERY RELEASE switch and remove the battery pack.
7.Reattach the lens cap.
Cleaning The Camcorder
1.Clean the exterior, wiping gently with a soft cloth. For heavy dirt, use diluted, mild soap and wring the cloth well. Then wipe again with a dry cloth.
2.Open the LCD monitor and wipe it gently with a soft, dry cloth. Close it when done.
3.To clean the lens, blow it with air using a blower brush. Wipe gently with lens cleaning paper.
4.To clean the viewfinder, raise it to the vertical position. Turn the eyepiece counterclockwise and pull it out. Insert a lens blower or soft cloth into the gap to clean the interior. Reattach the eyepiece and turn it clockwise until it snaps into place.
Notes:
•Avoid using strong cleaning agents such as alcohol.
•Cleaning should be done only after the power supply has been disconnected.
•Mold may form if the lens is left dirty.
•When using a cleaner or chemically treated cloth, refer to the cautions of each product.
102 | Chapter 7 |