RCA LDK 8000 manual SportCam with high-speed Base Station

Chapter 3 - Configurations

3.4SportCam with high-speed Base Station

To obtain a high-speed output, the SportCam must be connected to the high-speed TriaxHD Base Station (LDK 4506). The connection between the SportCam and the Base Station uses the same Triax cable as the other configurations and operational control uses the same C2IP network and units. The high-speed TriaxHD Base Station supplies a dual-phase high-speed HD signal for a recording system.

Figure 3-4. SportCam with SuperXpander and high-speed TriaxHD Base Station.

SportCam + SuperXpander

TP	External	Power
in	video in	in

Camera Base Station

High-speed

HD Base

Station

Audio Video out out

Digital dual phase (2x SDI 1.5 Gb/s)

RS 422

Cross over

Ethernet cable

OCP 400

Composite output for monitoring

Standard PGM output (270 Mb/s) for slow motion playback

Playback	Harddisk
Controller	recorder

32 LDK 8000 HDTV camera system User’s Guide (v3.0)