RCA LDK 8000 manual Operating instructions, Using the camera, Switching on the power

Chapter 5 - Operating instructions

Chapter 5

Operating instructions

5.1Using the camera

Attach lens, viewfinder, microphone and any other accessories to the camera. Attach the triax cable or supply the adapter with power.

5.1.1Switching on the power

1.On the Base Station set the master power switch to the on position (I). The green power light lights.

2.Set the camera Power switch of the camera to the on position .

3.Allow a few moments for the camera to perform a self-test and for the system to establish communications.

☞Note

To switch the camera to stand-by, set the Power switch of the camera to the position.

5.1.2Controlling the camera

There are several ways of controlling the camera:

•Using an MCP 400 connected to the C2IP network.

•Using an OCP 400 connected to the C2IP network or Base Station.

•Using the switches on the camera itself.

•Using the menu system to select functions.

☞Note

If you cannot access some camera functions or you wish to restrict access, refer to “Access and Security” on page 69.

LDK 8000 HDTV camera system User’s Guide (v3.0) 41