RCA LDK 8000 manual Access control, Camera card slot, PIN code

Chapter 5 - Operating instructions

5.11.2 Access control

The owner’s card or the PIN code is used to access special set-up and security features of the camera. Inserting the owner’s card into the associated camera always gives direct access to the Security menu (PIN code is not required). If you select the Security menu without this card inserted, you must enter the correct PIN code to gain access to this menu.

PIN code

The PIN code of the camera can be viewed and changed in the Security menu. The camera's PIN code when it leaves the factory is set to 0000. It is strongly advised that this code be changed by the owner on receipt of the camera. This ensures added protection against unaurthorised access to the Security menu.

5.11.3 Camera card slot

Insert your camera card into this slot with the chip on the card facing the front of the camera. Push the card home until it fits snugly. A camera card is not required for normal operation of the camera.

Figure 5-14. Camera card slot

☞

☞

Note

Only use an original camera card. Store the owner’s card in a safe place.

Note

An LDK 8000 SportCam will only read LDK 8000 SportCam cards.

70 LDK 8000 HDTV camera system User’s Guide (v3.0)