Chapter 3 - Configurations

3.5Local mode

A camera head with the LDK 5860 TriaxHD adapter can be used in the local mode. The DC power supply is applied to the adapter. An OCP 400 operational control panel can be connected directly to the camera using the RS232 connection. A reference signal can be applied to genlock the camera.

Standard and WorldCam versions

The HD SDI (B) / VF connector at the rear carries the HD SDI viewfinder signal. The HD SDI (A) connector carries the HD SDI camera signal.

SportCam version

The HD SDI (A) and HD SDI (B) / VF connectors at the rear carry the HD SDI viewfinder signal. An HD SDI camera signal output is not available.

Figure 3-5. Camera in local mode

Reference

in

Camera head + Triax adapter

Video out

RS232 connection

DC power

in

OCP 400

LDK 8000 HDTV camera system User’s Guide (v3.0)

33

Page 33
Image 33
RCA LDK 8000 manual Local mode, Standard and WorldCam versions, SportCam version